Refine
Year of publication
Document Type
- Diploma Thesis (8420)
- Bachelor Thesis (2639)
- Master's Thesis (1052)
- Doctoral Thesis (351)
- Article (127)
- Book (34)
- Part of a Book (33)
- Working Paper (5)
- Report (4)
- Other (2)
Institute
- Maschinenbau und Kraftfahrzeugtechnik (bis 2018) (4525)
- Physikalische Technik, Informatik (1836)
- Gesundheits- und Pflegewissenschaften (1630)
- Wirtschaftswissenschaften (1405)
- Elektrotechnik (770)
- Sprachen (602)
- Angewandte Kunst (561)
- Kraftfahrzeugtechnik (384)
- Architektur (374)
- Ingenieurhochschule (254)
Language
- German (12417)
- English (231)
- French (12)
- Multiple languages (3)
- Spanish (3)
- Portuguese (1)
The research was carried out for the selection of optimal options for the heat supply of multi-apartment buildings, taking as an example several new buildings in Yerevan. The purpose of the study is to confirm the choice of the best method of providing heat in apartment complexes. It was used to calculate and analyze the energy-economic and operational-technical indicators of individual heating boilers, small centralized systems, and hybrid systems to solve this problem. The calculations considered both natural gas tariffs and fluctuations in the value of the Armenian dram against the US dollar. The value of 1 kWh of thermal energy or specific heat capacity has been determined as an important criterion for choosing the most efficient method of heat supply, considering the careful analysis of almost all variable factors.
En 1985 inició el Ministerio de Educación en Venezuela el Modelo de Atención Integral al Niño Sordo, un cambio de la práctica oralista a un modelo bilingüe en las escuelas de sordos. Eso implicaba eliminar la enseñanza del español hablado como objetivo principal e introducir la Lengua de Señas Venezolana (LSV) a las escuelas. Se desencadenó así un intenso período de cambios que marcó indeleblemente a la comunidad sorda. Aquí se aborda el Modelo desde la perspectiva de la planeación lingüística, describiendo sus objetivos y sus efectos sobre la adquisición, la estructura (el corpus) y el estatus de la LSV: La LSV y el español señado fueron reubicados en la diglosia existente hasta entonces; surgió una variante académica de la LSV y aumentó el número de usuarios de la LSV. El estudio se basó en el análisis cualitativo de entrevistas realizadas a cinco testigos de aquel proceso.
Sustainable Integration of Digitalisation in Nursing Education - An International Scoping Review
(2024)
In dieser Arbeit wird das Blickverhalten von Fahrzeugführern von PKW durch die
Innen- und Außenspiegel thematisiert.
Dazu werden zu Beginn der technische Stand von Fahrzeugspiegeln und Assistenzsystemen
im Zusammenhang mit diesen, rechtliche Rahmenbedingung zu
Fahrzeugspiegeln (insbesondere für PKW) sowie Grundlagen zur Informationsaufnahme
und Distanzschätzung des Menschen behandelt. Weiterhin werden die Ergebnisse
vorheriger Untersuchungen zum Blickverhalten von Fahrzeugführern
durch die Rückspiegel sowie zur Einschätzung von Distanzen durch die Rückspiegel
thematisiert.
Der Schwerpunkt dieser Arbeit liegt darauf, in einem Versuch unter der Vorgabe der
Fixationszeiten vergleichbare Ergebnisse zu vorangegangenen Untersuchungen
hinsichtlich der Qualität von Distanzschätzungen durch die Fahrzeugspiegel zu erzielen.
Dazu wurde im Vorfeld ein System entwickelt, welches es dem Versuchsleiter
ermöglicht die Fixationsdauern der Probanden für die einzelnen Spiegel gezielt
zu steuern. Die gewonnenen Ergebnisse des Versuchs werden im Anschluss ausgewertet
und mit denen vorangegangener Untersuchungen verglichen.
Schlussendlich werden Rückschlüsse für die Verkehrssicherheit sowie die Verwendbarkeit
der Probandenaussagen im Rahmen der Rekonstruktion von Verkehrsunfällen
gezogen. Abschließend erfolgt ein Ausblick auf weiterführende Untersuchungen.
Im Mittelpunkt des Artikels steht die Frage, welche Eingabemethoden sich für die Eingabe längerer Texte auf Mobiltelefonen eignen. Der Grund dafür ist, dass Artikel über Eilmeldungen in der Regel lang sind und die Verwendung einer Handytastatur zur Eingabe langer Texte sowohl ineffizient als auch mühsam ist.
Daher änderte ich meine Zielsetzung in
1. eine geeignete Eingabemethode für das Schreiben langer Texte auf Mobiltelefonen auf der Grundlage der Literatur zu finden.
2. eine geeignete Eingabemethode für die Erfassung von kritischen Ereignissen zu finden.
3. schließlich die Bewertung dieser Eingabemethoden in Bezug auf Komfort und Effizienz.
In der vorliegenden Diplomarbeit wird ein Konzept zur hochverfügbaren Anbindung von Computernetzwerken an externe Private-Cloud-Rechenzentren erarbeitet und getestet. Dafür wurde im Vorfeld eine Anforderungsanalyse zur Ermittlung der Anforderungen an diese hochverfügbaren Anbindungen durchgeführt. Im Folgenden wurden Technologien zur Erfüllung der Anforderungen ermittelt, kombiniert und auf Nutzwerte verglichen. Die Kombination der Technologien mit dem höchsten Nutzwert wurde in einem Prototyp umgesetzt und in einer Testumgebung auf die Erfüllung der Anforderungen getestet. Ziel dieser Arbeit war es dabei ein herstellerneutrales, infrastrukturunabhängiges und in verschiedenen Anwendungsfällen nutzbares Konzept zu entwickeln. Diese Unabhängigkeit und Offenheit soll es ermöglichen, dieses Konzept in verschiedenen Szenarien, welche eine Anbindung von Computernetzwerken an externe Private-Cloud-Rechenzentren erfordern, einsetzen zu können. Dadurch soll die Zeit zur Konzeption einer Lösung in der Praxis erheblich gesenkt werden.
Die flatexDEGIRO AG, ein führender Online-Broker, nutzt für den technischen
Onboarding-Prozess seiner Neukunden eine Monolithen-Architektur, mit Hilfe welcher
Kundenkonten, Konten und Depots angelegt werden.
Ziel dieser Arbeit ist die Untersuchung der Möglichkeiten, den aus technischer Sicht
langlaufenden IT-Prozess auf eine Microservice-Architektur umzustellen und dafür
einen geeigneten Prozessmanager zur Überwachung und Steuerung zu empfehlen.
Dazu wird in dieser Arbeit der Geschäftsprozess detailliert erklärt und sowohl der Ist-
als auch der Soll-Zustand der Systeme aufgezeigt. Es werden verschiedene Patterns
im Kontext der Anforderungen der flatexDEGIRO AG evaluiert. Darunter befinden sich
Two Phase Commit, Three Phase Commit, Saga, Routing Slip, Message Router und
Prozessmanager. Diese Patterns, werden in Bezug auf ihren Aufbau und ihre
Funktionen beschrieben, um ein fundiertes Verständnis zu gewährleisten. Ergänzend
werden notwendige Technologien und Konzepte erläutert.
Darüber hinaus werden Frameworks wie Apache Camel, Spring Integration und Axon
betrachtet, um die Patterns zu implementieren. Die Auswahl dieser Frameworks
wurde, durch die bei der flatexDEGIRO AG bereits vorhandenen Technologien
beeinflusst.
Den Abschluss dieser Arbeit wird die Zusammenfassung der Evaluation und des
Vergleichs der Patterns bilden. Hierfür wird ein Bewertungsschema ein Ergebnis
hervorbringen, das für die weitere Entwicklung des Gesamtsystems und vor allem des
betrachteten Geschäftsprozesses valide Optionen aufzeigen wird.
Diese Masterarbeit, wurde in Zusammenarbeit mit der Firma Geuder AG, Standort Heidelberg, erarbeitet. Ziel und Zweck dieser Arbeit war es, den Beschriftungsprozess der chirurgischen Instrumente zu validieren und somit für prozesssicher zu erklären. Zum Validierungsprozess gehören verschiedene Teilprozesse wie die Erstellung eines Validierungsplans, in dem beschrieben wird, was das Ziel der Validierung ist und wie es erreicht werden soll bzw. mit welchen Materialien es umgesetzt wird. Des Weiteren wurde eine Fehlermöglichkeitsanlayse (FMEA) durchgeführt, um entstehende Hindernisse im Prozess betrachten zu können und einen Notfallplan zu erstellen. An die FMEA schließen sich die Funktionsqualifikation (OQ) und die Leistungsqualifikation (PQ) an. Die IQ (Installationsqualifikation) , die noch vor der OQ stattfindet wurde von der Firma FOBA übernommen. Die OQ wurde im Rahmen verschiedener Tests durchgeführt. Die Laserparameter für die Anlassbeschriftung wurden auf ihre Randbedingungen getestet. Diese sind vor allem bei rauen oder grob verschmutzten Beschriftungsfläche zu finden. Im Anschluss an die OQ, in der die Rahmenbedingungen festgelegt wurden, um ein gutes Beschriftungsergebnis erzielen zu können, wird eine PQ durchgeführt. Diese ist kein Bestandteil dieser Arbeit.
Nichteisenmetalle
(2022)
ALADIN – Generator für Aufgaben und Lösung(shilf)en aus der Informatik und angrenzenden Disziplinen
(2022)
Hintergrund/Zielstellung: Aufgrund des gestiegenen Informationsbedürfnisses von Patienten wird für Ärzte ein eigener Webauftritt als Informationsmittler mit dem Ziel der Patientengewinnung und -bindung zunehmend bedeutsam. In der vorliegenden Studie wurde daher die Patientenorientierung der Internetauftritte niedergelassener Fachärzte für Orthopädie und/oder Unfallchirurgie in Sachsen untersucht.
Methode/Stichprobe: Alle Websites der im Arztregister der Kassenärztlichen Vereinigung Sachsen gelisteten Fachärzte für Orthopädie und/oder Unfallchirurgie wurden mithilfe einer standardisierten Checkliste analysiert.
Ergebnisse: Von allen untersuchten Fachärzten (n = 349) besaßen 140 (40,1 %) einen eigenen Internetauftritt. In der Arztpraxis durchgeführte diagnostische Methoden und Therapiemaßnahmen wurden auf je ca. 90,0 % der Websites genannt und auf ca. der Hälfte hiervon erklärt. Der Kontrast konnte auf 10 Websites angepasst werden. Eine Meinungsäußerung wurde den Patienten auf 28 Websites ermöglicht. Rechtlich verpflichtende Impressuminhalte wurden auf 45,0 % der Internetauftritte nicht hinreichend beachtet.
Diskussion/Schlussfolgerung: Die Ergebnisse weisen darauf hin, dass die Gestaltung der Internetauftritte sowie deren Informationsgehalt differieren und Verbesserungspotenziale existieren. Ein standardisierter Kriterienkatalog könnte ein einheitliches Qualitätsniveau gewährleisten und von den Ärzten als Handlungsempfehlung genutzt werden.
Analgesic drug use of recreational and competitive badminton players: Starting points for prevention
(2021)
Objectives: Evidence-based clinical guidelines play an important role in healthcare and can be a valuable source for quality indicators (QIs). However, the link between guidelines and QI is often neglected and methodological standards for the development of guideline-based QI are still lacking. The aim of this qualitative study was to get insights into experiences of international authors with developing and implementing guideline-based QI.
Setting: We conducted semistructured interviews via phone or skype (September 2017–February 2018) with guideline authors developing guideline-based QI.
Participants: 15 interview participants from eight organisations in six European and North American countries.
Methods: Organisations were selected using purposive sampling with a maximum variation of healthcare settings. From each organisation a clinician and a methodologist were asked to participate. An interview guide was developed based on the QI development steps according to the ‘Reporting standards for guideline-based performance measures’ by the Guidelines International Network. Interviews were analysed using qualitative content analysis with deductive and inductive categories.
Results: Interviewees deemed a programmatic approach, involvement of representative stakeholders with clinical and methodological knowledge and the connection to existing quality improvement strategies important factors for developing QI parallel to or after guideline development. Methodological training of the developing team and a shared understanding of the QI purpose were further seen conducive. Patient participation and direct patient relevance were inconsistently considered important, whereas a strong evidence base was seen essential. To assess measurement characteristics interviewees favoured piloting, but often missed implementation. Lack of measurability is still experienced a serious limitation, especially for qualitative aspects and individualised care.
Conclusion: Our results suggest that developing guideline-based QI can succeed either parallel to or following the guideline process with careful planning and instruction. Strategic partnerships seem key for implementation. Patient participation and relevance, measurement of qualitative aspects and piloting are areas for further development.
Trial registration number: German Clinical Trials Registry (DRKS00013006).
Background
Stroke is one of the most frequent causes of death in Germany and the developed countries. After a stroke, those affected often suffer particularly from functional motor restrictions of the upper extremities. Newer techniques such as the BCI-FES systems aim to establish a communication channel between the brain and external devices with a neuromuscular intervention. The electrical activity of the brain is measured, processed, translated into control signals and can then be used to control an application.
Methods
As a mixed-methods design (exploratory design), eight guideline-based expert interviews were conducted first. For the quantitative expert survey, 95 chief physicians from the field of neuromedicine in rehabilitation facilities nationwide were subsequently invited to participate in an online survey.
Results
In our data analysis, we found that doctors are largely open-minded towards new technical rehabilitation systems. In addition to the proper functioning of the system, they consider the understanding of the functionality and the meaningfulness of the system to be particularly important. In addition, the system should be motivating for individuals, generate meaningful movements, be easy to use, evidence-based and quick to set up. Concerns were expressed regarding the understanding of the system’s processes, especially in the acute phase after a stroke, as well as the excessive expectation of results from the system on the part of the persons. The experts named stroke patients in rehabilitation phase C, which is about mobilization and recovery, as well as all persons who can understand the language requirements as benefiting groups of people.
Conclusion
The present study shows that more research should and must be done in the field of BCI-FES interfaces, and various development trends have been identified. The system has the potential to play a leading role in the rehabilitation of stroke patients in the future. Nevertheless, more work should be done on the improvement and implementation as well as the system’s susceptibility to interference in everyday patient life.
Context
VR as an application to enhance well-being is sparsely researched in the elderly population. The aim of the pilot study was to analyze the effect of 360° videos of different categories on the state of mind of seniors in nursing facilities. Furthermore, for the implementation in everyday life, the usability of the system and the experience for seniors should be evaluated.
Methods
The VR experience was used as a supplement to existing care services in three facilities on eight subjects. Mood state was assessed using the Questionnaire for the Assessment of Happiness before and after the intervention. Demographic data and technology acceptance were collected beforehand. After the intervention, subjects were interviewed about confounding factors and side effects, and nursing home staff were interviewed about the usability of the system and the organizational concept of implementation.
Results
There was a positive effect on state of mind. Gender and spatial mobility turned out to be influencing factors. Categories containing people, animals and action achieved the highest increases in the state of mind. Interest in using technical devices correlated negatively with the change in mood state. None of the subjects found the VR goggles distracting or reported motion sickness. Very good usability was indicated by the employees.
Conclusion
A very high willingness to use this technology was found among nursing staff and residents. The tendencies of the positive effect of 360° videos on the state of mind, as well as differentiation based on the mentioned characteristics gender and spatial mobility, should be verified by a larger sample to empirically validate the use of this technology to increase the quality of life.
Hintergrund
Die Studienzeit ist eine Phase, in der die jungen Erwachsenen mit spezifischen Anforderungen konfrontiert werden. Studierende der Medizin gelten als besonders psychisch belastet. Untersuchungen, in denen sie diesbezüglich mit Studienfächern der gleichen Branche verglichen werden, sind jedoch rar.
Fragestellung
Ziel der Untersuchung war es, die psychische Gesundheit von Medizinstudierenden sowie von Gesundheits- und Pflegemanagementstudierenden zu untersuchen und zu vergleichen.
Material und Methoden
Untersucht wurden Studierende der Studiengänge Gesundheits- sowie Pflegemanagement (WHZ) und Medizinstudierende der (TU Dresden). Verschiedene Aspekte psychischer Gesundheit wurden mithilfe eines Online-Fragebogens erhoben. Dieser beinhaltete die Instrumente zur Erfassung der Prüfungsängstlichkeit (TAI-G-Kurzskala) und psychischen Belastung (BSI-18), sowie ein Item zur Ermittlung der subjektiv wahrgenommenen Studienbelastung. 258 Studierende nahmen an der Befragung teil.
Ergebnisse
Es konnten keine signifikanten Unterschiede hinsichtlich des Gesamtscores der Prüfungsängstlichkeit und der psychischen Belastung zwischen den Studierenden beider Studienfächer festgestellt werden. Dahingegen gaben Medizinstudierende an, dass sie im Vergleich zu Studierenden der anderen beiden Studienfächer eine signifikant höhere Studienbelastung wahrnehmen.
Schlussfolgerung
Die ermittelten Gesamtscores lagen teilweise über den Werten in vergleichbaren Studien. Die Studierenden sollten bereits präventiv unterstützt werden, um eigene Bewältigungsstrategien zu entwickeln. Nicht nur die Bereitstellung von Hilfen ist notwendig, sondern vielmehr das aktive Eingreifen mithilfe von gesundheitsfördernden Maßnahmen durch die Institution Hochschule, in die die Studierenden frühzeitig integriert werden sollten.
This paper provides a critical reading of Janek Wasserman’s The Marginal Revolutionaries: How Austrian Economists Fought the War of Ideas. Wasserman depicts the evolution of the Austrian School from the 1860s until today, a particularly illuminating narrative for the readers of this journal. The breadth of portrayed economists, their cultural embeddedness in Austrian and US contexts, and the complexity of configurations across the school’s generations create a rich and readable story. The last third of the book suffers from allegations about the ideological agenda and institutional power of the Austrian economists which sometimes lack sufficient substantiation. The paper indicates how both in their theorizing and in their political activities, the Austrian economists can be seen as reformers instead of revolutionaries, and as constitutionalists instead of anti-democrats. Despite these disagreements, Wasserman’s portrayals evoke largely fair and challenging impulses both to scholars working in the Austrian research program and to those interested in the Austrian School’s long history, regardless of one’s ideological positions.
Introduction
(2022)
A novel approach to consider triaxial tensile stresses within the framework of a failure criterion
(2022)
For use in micromechanical simulations of continuous fiber reinforced polymers, a more general form of the paraboloid failure criterion by Stassi‐D'Alia for matrix failure was developed with explicit consideration of the hydrostatic tension strength. Regarding polymers, limits for hydrostatic tensile strength based on isotropic linear elasticity could be derived. The comparison of the newly developed extended paraboloid criterion with experimental data for yielding as well as for material separation (fracture) shows good agreement.
Based on a real-world application in the semiconductor industry, this article models and discusses a hybrid flow shop problem with time dependencies and priority constraints. The analyzed problem considers a production where a large number of heterogeneous jobs are processed by a number of machines. The route that each job has to follow depends upon its type, and, in addition, some machines require that a number of jobs are combined in batches before starting their processing. The hybrid flow model is also subject to a global priority rule and a “same setup” rule. The primary goal of this study was to find a solution set (permutation of jobs) that minimizes the production makespan. While simulation models are frequently employed to model these time-dependent flow shop systems, an optimization component is needed in order to generate high-quality solution sets. In this study, a novel algorithm is proposed to deal with the complexity of the underlying system. Our algorithm combines biased-randomization techniques with a discrete-event heuristic, which allows us to model dependencies caused by batching and different paths of jobs efficiently in a near-natural way. As shown in a series of numerical experiments, the proposed simulation-optimization algorithm can find solutions that significantly outperform those provided by employing state-of-the-art simulation software.
In this work, a new method for selecting suitable materials is presented. This method has a high potential for a variety of engineering applications, such as the design of sound-absorbing and vibration-loaded structures, where a large number of different requirements have to be met. The method is based on the derivation of functional dependencies of selected material parameters. These dependencies can be used in parameter studies to consider parameter combinations that lie in the range of real existing and targeted material groups. This allows the parameter space to be reduced, the calculation to be accelerated, and suitable materials to be (pre-)selected for the respective application, which contributes to a more target-oriented design. The method is applied to the example of a plate resonator. For this purpose, a semi-analytical model is implemented to calculate the transmission loss as well as the reflected and dissipated sound power of plate silencers, taking into account the influence of flow velocity and fluid temperature on the performance of plate silencers.
Analysis of a Film Forming Process through Coupled Image Correlation and Infrared Thermography
(2022)
The aim of the present investigation was to determine the dependence of the material and process parameters of the bending process of thermoplastic films. In this context, parameter combinations leading to high resulting forming ratios were identified. To measure the relevant parameters within the hot bending process, a coupled evaluation of infrared thermography (IRT) and deformation measurement using digital image correlation (DIC) was performed. The coupled measurement enables the identification of the actual mechanically stressed bending area of the film as a result of the bending process. This allows for the specification of the local forming temperatures required for the desired forming ratios. Furthermore, the mechanical and thermal strain along the defined measuring sections and their deviation in individual tests as well as the effect of thermal strain on process control on a larger scale were determined. Based on the results, a process window was defined for the film materials investigated, which will serve as a starting point for future efforts to develop a continuous manufacturing process.
The atomizing gas dynamics and the applied process energy have a significant influence on the produced particles. The melting process of the two wires can be influenced by current modulation. As for arc welding processes, more and more electronic and software-controlled machines are being used for arc spraying and will have replaced conventional power sources in the future. Due to the highly dynamic, fast regulating computing technology in the latest energy source, technology arcs can be operated with different current forms and types. The modern machines allow process-stable, reproducible variation of the particles and heat input into the substrate. Constant and pulsed current can be used as current forms. Usable current types are direct current (DC) and alternating current (AC). The electrical parameters must be analyzed to evaluate the process behavior. The consumable used is a wire-shaped iron-based alloy with a diameter of 1.6 mm. Relevant process parameters such as basic current Iground, pulse current Ipulse, pulse duration tpulse, impulse frequency fpulse, and alternating current frequency, fAC, are varied and recorded using appropriate measurement technology. The aim is to change the process performance and thereby the particle formation in a broad band. High-speed images are used to observe the arc and the deposition process. In addition, particle sizes are determined.
Electrical and thermal measurements were conducted during the plasma electrolytic polishing (PEP) of cemented tungsten carbide (WC-Co) materials to characterize energetic aspects of the process in relation to the temporal development of the gaseous layer near the workpiece. The power transferred to the workpiece is determined using a calorimetric probe and employing the time derivative of the temperature curve. It shows distinct heating phases due to the generation of the gaseous layer. At the beginning of the process, a typical power of 367 ± 17 W is transferred to the workpiece of a surface area of 14 cm2. At longer process times, a stabilized gaseous layer limits the power transferred to the workpiece to 183 ± 3 W. In an attempt to describe the heat transferred to the electrolyte, the electrolyte temperature was measured using a thermocouple situated 15 mm away from the workpiece. The local electrolyte temperature increases from 70 to 81 °C for an immersion depth of 20 mm. Moreover, the spatiotemporal development of the electrolyte temperature was obtained by 2D-hydrodynamic modeling using COMSOL Multiphysics®. The modeling results for the local temporal temperature development are in excellent agreement with the experimental values when the turbulent model is applied up to t = 65 s. Afterward, the laminar model leads to a better agreement. Furthermore, line scan x-ray photoelectron spectroscopy revealed that aliphatic carbon was preferentially removed. Only a slight compositional gradient in the vertical direction after the PEP process was observed.
Liquid deposition modeling is an energy-efficient, additive manufacturing process for pasty materials. Physical material properties were determined for a water-based paste consisting of the binder carboxymethyl cellulose and wood flour. A continuously operating dual screw extruder was developed, which was used to manufacture a table frame with a height of 18 cm.
Introduction: In the spring of 2020, coronavirus disease 2019 posed a substantial challenge for countries and their healthcare systems. In Germany, over 70% of all cancer patients are treated in an outpatient setting, so gynecologic oncology practices are the guarantors of optimal patient care. We developed a survey to evaluate the management of gynecologic oncology patients.
Methods: The survey consisted of 38 questions and was sent to the members of the Berufsverband Niedergelassener Gynäkologischer Onkologen in Deutschland e.V. (BNGO), a professional association of gynecologic oncologists in the outpatient sector in Germany.
Results: The survey was completed by 54 out of 133 (41%) gynecologic oncologists from 14 out of 15 (93%) federal states where the BNGO is represented. Facing the pandemic, popular measures were mask requirements (100%), restriction of access to practices (94%), increased number of disinfectant dispensers (85%), installment of panes of acrylic glass (76%), or spatial alterations (67%). For most patients the pandemic had no influence on prioritization of therapies (82%) or prescribed systemic treatments (87%). Despite an increase in perceived psychological burden among the staff (72%), 85% (45/54) of the practices were not offered any additional psychological support.
Discussion and Conclusion: As most cancer patients in Germany are treated in an outpatient setting, a suitable reaction of oncology centers to the new circumstances was crucial to secure optimal treatment and patient care. Nevertheless, the low prioritization of mental health or distress of healthcare workers poses a serious threat to the maintenance of optimal medical care in further waves of the pandemic.
Hintergrund: Wenn professionelle Unterstützung fehlt, erkennen pflegende Angehörige selten eigene Überlastungssituationen und nehmen Unterstützungsleistungen bei Pflegebedürftigkeit daher unzureichend in Anspruch.
Ziel: Die Studie untersucht die Versorgung von Menschen mit Pflegebedarf, den Kenntnisstand zu Entlastungsleistungen sowie Belastungsfaktoren bei der Übernahme pflegerischer Leistungen aus Sicht informell Pflegender und Nicht-Pflegender.
Methode: Es wurde eine Querschnittstudie mittels standardisierter Computer Assisted Telephone Interviews (CATI) mit Personen ab dem 18. Lebensjahr in Sachsen durchgeführt. Deskriptive und bivariate Statistiken wurden berechnet.
Ergebnisse: Die Versorgung durch einen ambulanten Pflegedienst oder durch pflegende Angehörige bewerteten von 601 Teilnehmenden 259 informell Pflegende gegenüber 342 Nicht-Pflegenden signifikant besser ( N = 601). Weiterhin hatten die informell Pflegenden und die Nicht-Pflegenden unterschiedliche Kenntnisse über den nächstgelegenen Ort der Pflegeberatung und über Ausgleichzahlungen der Rentenversicherung. Schlussfolgerungen: In einzelnen Bereichen der abgefragten Beratungsleistungen und Entlastungsmöglichkeiten hat sich das Antwortverhalten von pflegenden Angehörigen gegenüber den anderen Teilnehmenden signifikant unterschieden. Es kann von einem geringen Informationsvorsprung der pflegenden Angehörigen bei der Inanspruchnahme von Unterstützungsleistungen ausgegangen werden.
Zusammenfassung
Hintergrund
Die COVID-19(„coronavirus disease 2019“)-Pandemie hat die Ad-hoc-Digitalisierung an Hochschulen vorangetrieben. Zugleich stand die digitale Hochschullehre vor der Herausforderung der Ausgestaltung der Lehre im Zusammenhang mit den vorbestehenden Ressourcen, der digitalen und didaktischen Kompetenzen sowie der zur Verfügung stehenden technischen Infrastruktur.
Ziel der Arbeit/Fragestellung
Das Ziel der Umfrage war die Einschätzung der digitalen Lehre, die die Präsenzlehre infolge der COVID-19-Pandemie zum großen Teil bzw. gänzlich ersetzt hat, aus der Perspektive der Lehrenden in Public Health, Medizin und Pflege.
Material und Methode
Die Querschnitterhebung fand online von Juni bis August 2020 statt und die Daten wurden über www.soscisurvey.de erhoben. Die schriftliche Befragung wurde unter Mitgliedern der Deutschen Gesellschaft für Public Health (DGPH) und des Ausschusses Digitalisierung der Gesellschaft für medizinische Ausbildung (GMA) und der Sektionen Bildung und Beratung der Deutschen Gesellschaft für Pflegewissenschaft (DGP) sowie der Arbeitsgruppe Lehre der Deutschen Gesellschaft für Medizinische Soziologie (DGMS) durchgeführt (n = 100).
Ergebnisse
Bei der Nutzung der digitalen Technologien in den Veranstaltungen rangieren auf der obersten Stelle Präsentationstools, gefolgt von Lernmanagementsystemen, Videoangeboten sowie digitalen Texten. Die Teilnehmenden geben hinsichtlich der Nutzung unterschiedliche (Konferenz‑)Tools an. Das Erstellen von Lehrvideos bejahen 53 % der Befragten, Abstimmungstools) werden bis 50 % als unbekannt genannt. Als Herausforderungen werden digitale Infrastruktur der Hochschulen, fehlende didaktische Beratung/Unterstützung sowie rechtliche Fragen (Nutzungsrechte, Datenschutz) angegeben.
Schlussfolgerung
Neue Technologie werden vorwiegend für Wissenserwerb, Wissensvermittlung genutzt, selten zur Aktivierung von Studierenden und zur Gestaltung kollaborativer Lehr- und Lernarrangements sowie Neugestaltung von Lernaufgaben und Lernprozessen (individualisiertes Lernen). Welche der aktuell erprobten digitalen Lehr- und Lernformate zukünftig in der Hochschullehre zunehmend eingesetzt werden, hängt von vielen Faktoren ab, u. a. von digitaler Kompetenz sowie der Bereitschaft der Lehrenden und Lernenden die digitale Lernkultur mitzugestalten.
The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.
Routing games over time are widely studied due to various applications, e.g., transportation, road and air traffic control, logistic in production systems, communication networks like the internet, and financial flows. In this article, we present a new competitive packet routing game with edge priorities motivated by traffic and transportation. In this model a set of selfishly acting players travels through the network over time. If the number of players who want to enter an edge at the same time exceeds the inflow capacity of this edge, then edge priorities with respect to the preceding edge are used to resolve these conflicts, which is similar to right-of-way rules in traffic. We analyze the efficiency of pure Nash equilibria, present an efficient algorithm for computing equilibria in symmetric games, and show that it is NP-hard to decide whether a Nash equilibrium exists in an asymmetric game. Furthermore, we address the problem of constructing optimal priorities.