Refine
Year of publication
Document Type
- Master's Thesis (54)
- Bachelor Thesis (48)
- Diploma Thesis (30)
- Article (1)
- Part of a Book (1)
Institute
Language
- English (134) (remove)
Is part of the Bibliography
- no (134) (remove)
Level crossings represent high risk for both rail and road users due to the severe consequences of any possible accident. Between 2011-2020, a total of 1602 accidents occurred at level crossings in Germany and resulted in 344 fatalities. Therefore, elimination of accident risk through consolidation of level crossings becomes a priority. However, due to the scarcity of financial resources in comparison to the high costs that level crossings consolidation or safety upgrade projects require, there is a need for the creation of tools that prioritize the level crossings for consolidation projects based on several criteria that is not related to safety only but to social, economic and environmental aspects as well. Such tool would be particularly useful for authorities and decision-makers in Germany to improve the resource allocation process and increase overall safety at German level crossings. In this project, the level crossing prioritization and consolidation models that are applied all over the world are reviewed and analyzed to benefit from the international experiences in this field. Additionally, a literature review to determine the most influencing factors on level crossing safety was performed. After that, a points-based priority score for German level crossings was developed based on analytic hierarchy process (AHP) methodology after a pairwise comparison survey was conducted to a selected level crossing group of experts. The developed model assigns a priority score from 1000 points to each level crossing. Crossings could be ranked according to their priority for consolidation and safety upgrade based on the points received as crossings with the highest priority score have a higher priority for elimination.
Vehicular emission is often the main source of air pollution. The chief pollutants react with air and secondary pollutants resulting in adverse effects to the environment. European commission has legislated laws in order to reduce the air pollution from vehicular emissions.
Traffic modelling has been used for many decades and particularly in the last decade, flow of traffic based on vehicle type has been used to estimate emission of polluting gases and particles. Passenger car and Heavy duty Emission Model (PHEM) is used along with microscopic traffic flow simulation software VISSIM (In German: Verkehr In Städten – SIMulationsmodell meaning "Traffic in cities - simulation model") for estimation of major two major pollutants of greenhouse gases (carbon dioxide, nitrogen oxides) and particulate matter emitted from passenger cars and heavy-duty vehicles, based on their technical performance characteristics in a traffic flow at a typical German motorway segment. With a country’s fixed fleet composition for a particular year, PHEM gives fuel consumption and emission as outputs using fuel types used (diesel or petrol) and based on the trajectories of the vehicles.
This study is planned to exploit the developments and investigate the validation of this software with HBEFA. Different 25 scenarios are created for a German motorway segment with varying traffic behaviours; and the emission results between two emission modelling software tools are compared.
Railways is one of the most important ways of transporting people and goods from place to another in the whole world. In Germany, it comes as the second most used way of transport. The German railways network is so big and covers the whole maps of Germany. That is why it is so important to develop and improve the performance of it. At this thesis work, the performance of every route at the German railways is calculated using a digital model which is created in PTV Visum software using the programming language python. Furthermore, the workload of every node (junction) at the German Railways is calculated, and according to that, recommendations to build an overpass structure at the overloaded Junctions is suggested to improve the capacity of this Junctions.
The Faculty of Languages at the University of Applied Sciences Zwickau has a knowledge
base on critical incidents. Critical incidents capture and structure insights from critical situations in international mobility [Fet15]. With the rapid development of data and information, the
research platform CIs to Go has a clear need for a central search infrastructure that will allow
users to find and discover more relevant critical incidenst (or intercultural experinces as named
in the research platform CIs to Go). The data and information about critical incidents are stored
in open-source relational database management system PostgreSQL.
Nowadays it is inconceivable to use traditional RDBMS tools to analyze the data as they
grow very fast. The amount of information has steadily increased for years. Big Data provides
a solution for analyzing large amounts of data. Many search engine providers offer the solution
for analyzing large volumes of data, and companies are looking for open source solutions that
can quickly and reliably search, analyze, and evaluate large volumes of data. Elasticsearch
is a Lucene based search engine. Elasticsearch uses the concept of indexing to speed up the
search. This search engine provides a variety of options for free text queries, fuzzy matching
and indexing data. First, search engines and NLP toolkits are reviewed. This thesis also defines
the functional requirements of these tools. Then, an evaluation is given by indicating the positive
and negative aspects of the tools.
This thesis presents a complete search engine to be deployed on the research platform CIs
to Go as a new visual tool that helps in the process of searching for and finding intercultural
experiences.
The goal of this paper is to determine all relevant factors that influence the economic outcome and development of a country including the culture people practice. In the beginning of the paper it will be given a thorough explanation of culture and its components. There have been different theories on how culture influences the economic power of a country which until today are considered controversial. Therefore, it will be taken a closer look at for instance the theory of Max Weber, who explained in his book
Research and studies have indicated that rural highways globally exhibit a disproportionately high incidence of accidents and fatalities, which can be attributed to inadequate traffic safety measures. This paper primarily examines the causes of inadequate traffic safety, with a particular emphasis on factors associated with road conditions. These causes can be broadly categorized into human factors, road factors, and vehicle factors. Indeed, the movement of vehicles on these rural roads is characterized by unrestricted traffic flow, whereby the driving stability of a vehicle is primarily impacted by factors such as road alignments and surface conditions. Single-vehicle run-off-road crashes frequently exhibit a correlation with insufficient road conditions. Hence, enhancing the alignment design of roadways can prove to be efficacious in minimizing the occurrence of traffic accidents. However, constraints may arise in the context of rural roads, thereby imposing limitations on designers and engineers in their ability to modify road design. Therefore, it is imperative to explore alternative measures to enhance road safety as required. The objective of this study is to analyse driving behaviour on a two-lane rural road in Germany, taking into consideration the varying alignments of the road. The WHZ static simulator is an innovative technological tool utilized within the field of road design analysis, specifically for the purpose of evaluating driving behaviour. Speed, lateral positions, and are the primary parameters utilized in the evaluation of driving behaviours.
Keywords: Driving Simulators, Driving Behaviour, Traffic Safety, Trajectory Classification
China
(2015)
Within this Bachelor Thesis the Chinese economic development with begin of the economic boom until today are described. With focus on the Austrian Business Cycle Theory by Ludwig von Mises and Friedrich Hayek the questions why and how economic bubbles develop are investigated and similarities between countries who experienced economic bubbles in the past and China analysed. The conclusion of the research is that the Chinese real estate market has indeed been caught in a boom-and-bust cycle and is at the moment going through recession. A future reoccurence of an economic bubble in China is possible.
The objective of this document is to design a connection between the devices of the two technologies SunSpec and Smart Energy 2.0 without the establishment of security backdoors. Smart Energy 2.0 devices should be able to gather data from SunSpec devices and modify writable registers for controlling purposes. Among other alternatives, the gateway proves itself as the most realistic and reasonable option and is chosen for further investigations. The connectivity requirements for such a device are analysed and mentioned. Interoperability between both networks is the core function of the gateway and established by the development of a Smart Energy 2.0 function set that implements the ability to represent SunSpec devices as resources in the Smart Energy 2.0 network. The gateway utilizes existing and introduces new mechanisms that maintain the high standard of security in Smart Energy 2.0 without any drawbacks. The document shows fundamental architectural approach and generally explains the functional and security mechanisms, but does not describe a complete gateway implementation.
Development and testing of a measuring system for recording mechanical loads on industrial batteries
(2019)
Multi-objective optimization of a model predictive vehicle dynamics control system using NSGA-II
(2022)
The development of the Automated Driving System (ADS) had a substantial significant impression on scientists. Throughout ADS, different units and controllers are installed, monitored, and analysed. The research is based on the theory of the Model Predictive Controller (MPC) system. which tackles the Multi-Objective Optimization (MOO) problem by calling out the cost function on the path-following problem using the MPC (i:e Model Predictive Path Following Control (MPFC)) with the defined constraints for the lateral control of the vehicle. The cost function helps to minimize the errors and compute the data. But the computation through the cost function is a bit complex. To overcome the complexity, an Non-Dominated Sorting Genetic Algorithm II (NSGA-II) algorithm is proposed, which helps to minimize the errors of set parameters and provides an optimal solution. The notion of NSGA-II is to find a wide variety of solutions and obtain better convergence in the form of the Pareto Optimal Front. Moreover, the detail of the Non-Dominated Genetic Algorithm II is theoretically enlightened to understand the Evolutionary Algorithm (EA) concept and the workability of the genetic algorithm. And the whole function is scripted in the MATLAB program.
Furthermore, we analyse the generated data in the Pareto Optimal Front and compare it with the Hyper-volume indicator, the most popular set-quality metric for rating stochastic multi-objective optimizer performance. Its theoretical characteristics, particularly the strict monotonicity concerning set dominance, which is still exclusive
to hyper-volume based indicators, justify its widespread acceptance. Hyper-volume indicator scrutinizes the optimal solution of multiple results. The analysis and
evaluation are completed between two other data sets generated and received through the RandomDATA and Multiple Objective Particle Swarm Optimization (MOPSO)
algorithm, which describe the quality of the best optimal solution between the results generated by the three algorithms.
Keywords: Non-Dominated Genetic Algorithm II, Model Predictive Path following Control, MATLAB, Algorithm, Pareto Optimal Front, Multi-Object optimization, Cost
Function
The accident data analysis uses data mining and machine learning techniques, focusing on the factors that are involved in the accident occurrence. This data is collected by the police who is a first investigator and is afterwards used by the accident researcher to examine possible accident causes and influences. The main purpose of this thesis is to get an in-depth understanding by creating new data for accident researchers which helps to understand certain accident scenarios in more detail.
The additional data is based on information derived from the decodation of Vehicle Identification Number (VIN) or in the German Language it is also known as Fahrzeugidentifikationsnummer (FIN). The FIN was decoded into its various sections in order to get the detail on its company, model and model year so that the analysis based on this factor can be added to the accident information and accident participant information. This system is automized for a fast integration of new FIN-data into the accident database and can further be used in the future in-depth study of accident occurrence. It is expected that the research and findings mentioned in this thesis report will help the researcher to analyze the influence of these vehicle characteristics in accident occurrence.
Within the bachelor thesis a strategic analysis of the Gulf States and the digital sector was made for the full-service provider T-Systems Multimedia Solutions GmbH, to show new growth opportunities for international business outside the European market and help them deciding whether or not the market approach would be advisable. An observation of the environment of the region of the Gulf States was made. The aim was to get familiar with local market practices such as societal and cultural customs. The two identified target markets Qatar and the United Arab Emirates are examined by giving a brief overview of the two countries by political, economic and social environmental analysis. It was attempted to compare relevant information about Qatar and the United Arab Emirates internationally and with Germany. In order to be able to assess the attractiveness of the ICT market, market volumes and annual growth rates of the Middle East were outlined. Market figures of Middle Eastern countries were compared worldwide and checked against market volumes and growth rates of Western Europe, North America and Asia-Pacific to get the big picture. The competitive situation in the IT market of the Middle East was examined by presenting leading IT service providers. An assessment of the positioning, portfolio and existent strengths and weaknesses has been compared. Market impact was illus- trated in respective service portfolio segments based on analysis of Pierre Audoin Consultants. Opportunities and risks of the ICT market in the Middle East are outlined. Most important sectors and strongest solutions for T-Systems Multimedia Solutions have been identified.
The aim of this bachelor thesis is to investigate how cultural differences of countries can be used to make assumptions on what kind of financial product might be the most efficient one based on the culture of a country. By using re-search that is trying to explain market performance differences and consumer behavior differences based on culture of a country. This thesis is trying to link those researches in order to create a cultural assessment framework that can be used to make predictions about a country
Over the last few decades, the motorization rate has steadily increased because of an increase in private car ownership each year. According to the survey, the vehicle-to-person ratio is at an all-time high. An increase in accidents and parking space issues are some of the consequences of having more vehicles on the road.
Autonomous vehicles can be a solution to these problems. To allow autonomous vehicles to drive on the road, their efficiency and functionality to perform various tasks such as object detection, path planning, and path following must be tested.
Autonomous parking can be extremely beneficial for both autonomous vehicles and conventional vehicles. This thesis aims to develop a methodology to find if Reinforcement Learning can be used as an alternative approach to motion planning for autonomous parking. Three Reinforcement Learning algorithms, namely Soft Actor Critic, Truncated Quantile Critics and Twin Delay Deep Deterministic Policy, were used to accomplish the motion planning task.
The reinforcement Learning agents were trained on three scenarios with different levels of complexity. The agent learned the behaviour to follow, which led to a higher success rate and reward maximization at the end of the training phase. In the testing phase, agents were tested on various scenarios, including unknown scenarios. Additionally,
a comparison between the three agent’s training and testing results has been made with possible reasons behind the behaviour of all three agents. The potential benefit from autonomous parking by Reinforcement Learning includes an effective solution for various parking scenarios and a generalized model which can be used without repetition of the training process.
This bachelor thesis focuses on the recent financial crisis that hit many countries one way or another. While the general causes and consequences are explained, the focus is on Spain and how the crisis developed there, in which ways the Spanish government and people were influenced and what measures were taken to restore the country's economy. Special emphasis is also put on the Austrian Business Cycle Theory in order to explain the origin of the financial crisis that started in 2007. All in all, the main aim of this paper is to give a small overview of this global crisis and its impact on Spain.
Experimental and theoretical investigation of mechanical stresses in Through-Silicon-Vias (TSV)
(2007)
In the work an experimental and theoretical investigation of the influence on the wafer bending of Through-Silicon-Vias (TSV) and their processing is presented. In a first step the influence of the anisotropic material properties of silicon and the thicknesses of an oxide hard mask and a tungsten film were analyzed at room temperature and as a function of the temperature up to 500 °C. For this purpose, the wafer bow was determined experimentally. In a second step, the analysis was extended to structured wafers. Wafers with Through-Silicon-Vias were etched and coated subsequently with several films. The wafer bow at room temperature was monitored stepwise. The theoretical analysis of bow and stress was done by using the Finite-Element-Program ANSYS. Models for unstructured wafers with various films were developed and the results compared with the experimental bow. For structured wafers, a model of a single via was generated; local deformations, stresses and the stress distribution were determined. To attempt the simulation of fully structured wafers, an effective medium model was developed as first step approximation.
As corporate social responsibility (CSR) is becoming increasingly important in China, this bachelor thesis examines the current state, problems and challenges of corporate social responsibility in China. Based on the analysis of the CSR strategies of Apple and Huawei in China, the thesis reveals lessons and guidelines for companies that want to implement a CSR strategy and integrate CSR operations into their business in China.
The objective of this work is to provide some useful tools to foreign investors intentioned to make business in Turkey, giving a general overview of the country. Political, economic, social as well as environmental characteristics are described in order to give a global point of view on this emerging market. Besides, four selected industrial sectors are analyzed and possible business opportunities for each sector have been indicated. In this sense, some considerations on the potentialities of Turkish market are given on the basis of two chances and risks profiles, one in the case that Turkey will become a full member of the European Union and the other in the case that it will maintain the actual status of simply associated partner.
The principal objective of this thesis is to execute a priority system for public transport buses at a signalized intersection. Based on the actual demand for buses, a dedicated bus lane is proposed to provide spatio-temporal priority. The optimal location was examined with the help of microscopic simulation software before bus lanes were introduced in the network. Bus priority lanes interrupted the existing traffic flow pattern and compelled straight-ahead vehicles to shift into adjacent lanes. Therefore, median turning lanes were added to improve the capacity of mainstreams. A fixed-time signal program with an additional transit priority phase was designed to accommodate peak-hour traffic flow. In order to achieve variabilities in the cycle length, a vehicle-actuated signal controller was implemented to operate the modeled intersection, which responds to the real-time traffic demand.
A simulation test was performed in VISSIM on both the actual and modeled intersection. Comprehensive result analysis in terms of travel time, vehicle delays, and queue lengths was made to determine the performance and saturation level of the selected intersection.
With the introduction of more and more stringent exhaust emission limitations for diesel engines by the legislation, engine and vehicle manufactures looking for solutions to meet this legislation limits with minimal hardware changes. In the present study experiments were performed to find possible solutions to meet TIER-4a emission limits without using a Diesel Particulate Filter (DPF). Two similar medium duty diesel engines were chosen to demonstrate this only by changing the fuel injection hardware and calibration. The study was divided into an investigation of the benefit of higher injection pressures while the second part concentrated on the investigation of multiple injection effects. It was found that with the use of high injection pressures from 1800 bar upwards together with high exhaust gas recirculation (EGR) rates the targets can be fulfilled with a single injection. This test was performed at the rated speed 100% load point. The multiple injection experiments demonstrated that the use of an early large pilot injection together with an close post injection can reduce the NOx and smoke emissions efficiently. It was found that with this injection strategy the TIER-4a emission targets can be achieved with a railpressure of only 1300 bar and lower EGR rate of 15% at a mid speed 75% load point (mode-6). The set of experiments also included a investigation into another efficient possibility to achieve TIER-4a emission standards with the use of a DPF but without the use of an EGR system. It was found that with the use of an early pilot injection and a retarded main injection timing it is possible to reduce the NOx formation to achieve the 3 g/kWh NOx limit.
Public transport not only plays an essential role in helping people with diverse economic backgrounds to access employment and services but also the everyday life and mobility of people. Public transport is one of the most essential segments of public infrastructure in any country and a key pointer towards the economic development of that country. This study will examine the current public transport system in the United Kingdom and Germany. The focus will be bus and rail services. The study will review the present transport policy in both countries, and the system of governance – stakeholders, infrastructure, planning, and the role of public transport in everyday life of the citizens. Based on these key aspects, the paper will analyze the better developed and the lagging areas of public transport by way of comparison between both countries. After analyzation, the paper will comment on and highlight areas with room for better policy and planning in future in the United Kingdom and Germany.
Keywords – public transport, analyze, governance, policy, infrastructure, comparison, future policy.
Die Bachelorarbeit beschreibt die Entwicklung, die verschiedenen Arten und die Auswirkungen in der Theorie und an konkreten Beispielen von Ausländischen Direktinvestitionen. Der Schwerpunkt liegt auf Deutschland als Teil der EU bzw. Ausländischen Direktinvestitionen aus China.
The SuperStitch is a suture-based closure device for the use during minimally invasive surgical procedures. The aim is to close a vessel or wound site in an open setting. The project is dealing with the further development of an already proven product pf the HeartStitch company. In the process, adaptation and fining solutions based on new requirements are discussed. These aim to perform surgery in the area of the human heart. The new field of application is mostly meant to deal with the closure of PFO's, ASD II and occurring residual shunts.
The aim of this Diploma Thesis is the adjustment and optimization of an existing turbocharged diesel engine on the much promising HCCI (Homogeneous Charge Compression Ignition) Combustion Technique in base on adapted piston geometries and injecting strategies. This adjustment is focused on the simulation of the complete engine, while suitable simulation programs for the different subsystems of the engine. On base of the 1-D simulation routine AMESim (Imagine) the Injector of the Common Rail System, and thus the injecting behaviour is simulated. Afterwards the results are used in the 3-D CFD program FIRE (AVL), in order to represent a Single Cylinder Engine of the overall system. The Conclusion forms the simulation of the overall diesel engine on the base of the simulation routine BOOST (AVL).
The role accomlished by Major Histocompatibility Complex (MHC) molecules in initiating and regulating immune respouses, binding short pepticles and displaying them on the cell surface for recoguition by Tiell receptors, is of the atmost importance in immunlogogy. However, only a subset of peptider is capable of binding to any particular MHC molecule. The study was undertaken to rationalize MHC/ peptide interactions in terms of molecular structural requirements for the prediction of class I MHC buding peptides. Prediction of buding activities by means of computational methods can minimize experimental assays, and lead to the development of vaceines and immune-therapeutie drugs.
The People's Republic of China has had the aim of a (socialist) market economy since 1976. Nevertheless, it is still under dictatorial control. In this paper it is analysed if the Chinese political system is compatible with a market economy and in which way the classification of a socialist market economy is justified. Finally, an explanation why the term sino-capitalism fits for the Chinese economic system best will be given.
The title of this thesis is the development of a Standardized Process Controlling and a method for the measurement of plant flexibility using the example of the Automotive Aftermarket (AA) division of the Robert Bosch GmbH. Developing the Standardized Process Controlling based on literature review and an analysis of existing procedures at the company. The approach consists of an instruction for process development and a reporting tool to control it after implementation. It is tested on three already existing processes as well as on the development of the Plant Flexibility process; establishing the Plant Flexibility measurement on the four aspects of line, volume, time and personnel capacity flexibility. In the application of the Standardized Process Controlling identified problems are used to improve and finalize the approach. As a result an easier implementation of processes as well as an evaluation of their current performance is possible.
The thesis explains the economic and political motivation of China's drive towards Africa, the political framework for this and the approach to the African continent via trade, investment and aid. The Sino-African cooperation is exemplified by the countries Angola, Sudan, Zimbabwe, Nigeria, Kenya and South Africa. Finally several points of criticism and the perceptions of the Western world towards China's engagement with Africa will be examined.
The use of fossil resources must be phased out during the next decades in order to stay below a well below 2°C trajectory adopted with the Paris Agreement. The growing threat of climate changes arises large uncertainties concerning natural and social systems and induced changes on economic activities and human welfare in the 21st century. As recent climate negotiations failed to achieve significant progress to stop the climate change, GHG emissions fragmented the international communities. Total carbon dioxide (CO2) concentration is at the highest levels ever recorded. Since, it is very important to differentiate the total CO2 and its origin.
Evidently, CO2 has been identifed as the most important GHG because it contributes the largest share to the anthropogenic increase of radiative forcing and grows fastest. Anthropogenic sources of CO2 emissions are fossilfuel combustion (FFC), cement production, traditional biomass combustion and land use change, which contain chlorouorocarbons, hydrochlorouorocarbons and others. Where Biogenic CO2 emission sources are fermentation, biogas and other biological process. Compare to atropogenicsource with high purity.
The thesis provides an improved overview of R&D, pilot, demonstration and commercial projects that capture CO2 from biogas plants and other biogenic sources and subsequently put this carbon to further use. Best practices in terms of business models and GHG saving potentials are described. The CO2 emissions mitigation are related to the innovation, technologies, investment and moreover the strong policies from the Government
Between Clash of Civilizations and Global Identity - the Interdependence of Culture and Economics
(2019)
Our life is becoming faster, more connected and more global - this developments have a lot of positive but also negative effects. Being fearful towards the "different" is a growing phenomenon and the question arises of we heading towards a global identity or a clash of civilizations, which factors play the important parts and how did they come into existence. By using North African immigration in France as an example, an approach is made to put this topic in a smaller context in order to see where the scenario is heading to and what is conducive and/or detrimental.
This paper describes a project developed to establish strategies to minimize stigmatisation and discrimination related to tuberculosis (TB). The fact that one-third of the worlds\' population is infected by TB supported the need for this project. Stigmatization towards infected people doubles the huge burden of the disease. Strong negative consequences, such as economic, social and psychological impact on individuals\' lives are well documented. Stigma prevents patients from seeking health care attention and prohibits providers from delivering effective treatment and high quality care. To understand the context of TB stigmatisation, a global survey was implemented to collect expert views on the main causes, consequences and methods to reduce TB related stigma. Survey findings influenced the development of strategies to minimize TB related stigma and discrimination, and have been integrated into an information and action toolkit developed for nurses around the world. The toolkit, titled - TB and Stigma: A Double Burden -, will be published by the International Council of Nurses in late 2005. Key methods will be available in the - Global TB/MDR-TB Resource Centre - at the following web link: http://www.icn.ch/tb/index.html
The world of engineering has changed significantly over the last years. Increased time to market, cost and produce variety constraints lead, next to the introduction of new engineering technologies and tools, to the implementation of new engineering processes, such as Simultaneous Engineering. The Rover Group started with the implementation of Simultaneous Engineering Principles within their development departments at the beginning of the 90's. The requirements towards the realisation of Simultaneous Engineering within their development projects changed when the Rover Group started working and developing products with BMW in 1994. Within this Diploma the intake manifold development process for the NG4 engine, the first joint developed combustion engine between the Powertrain sections of BMW and Rover, will be analysed. The basis for the analysed. The basis for the analysis of the Simultaneous Engineering Process are SE-Principles, based on literature research, which will be estimated on their degree of realisation within the development process. In the final part of the Diploma some recommendations regarding the creation of future Powertrain Engineering processes are given, in particular, focus on the improvement of the international co-operation between the development departments of BMW and Rover Group. It is to note, a lot of basic project information used for the analysis and recommendation within this Diploma are based on UK development sources. Not all statements given within this Diploma might be valid for the Munich based BMW departments or the manufacturing section. <!-- #h:dissdiplDevelopment.doc# -->
Traffic signal priority for Public Transit vehicle is considered as an effective strategy to reduce the delay times and increase service reliability. This strategy is implemented to stop the vicious cycle of traffic congestion due to excess utilization of private vehicle. Though this is an attractive alternative for a private vehicle, this strategy can be implemented without opting for any new transportation infrastructure. On doing so the concern towards sustainable mobility solutions is also addressed. Therefore, prioritizing public transport is the best possible way to adapt to the increasing mobility demands in urban areas. Along with the technological advancements, these priority strategies are also being developed.
With these advancements in priority strategies, more research towards Estimated Time of Arrival of transit vehicles a key parameter in Transit signal priority has been observed. One such new traffic signal priority is with C-ITS message profiles CAM and SREM. Though this advanced priority method is considered to outperform the existing traffic signal priority strategies, how much better they can perform is not yet determined. This thesis focuses on this aspect by comparing the existing Transit signal priority method with the advanced CAM and SREM Transit signal priority, in four different scenarios. Signal Control tool LISA and Simulation tool VISSIM are used for the whole design and evaluation process. Delay time, waiting time,and average speed evaluation parameters are considered for comparing and determining the performance of two Transit Signal priority methods.
Optimierung der logistischen Kette bei ElectroMagnetic GeoServices (emgs) - Analyse der wirtschaftlichen Effizienz bei Versendung und Lagerung von Ersatzteilen in Asien vor der Bedarfsentstehung
The increasing impact of Internal combustion engines on the environment have led to some stringent rules over the automotive industry, which have forced them to have a deeper investigation into the components of the engine.Friction, oil consumption and blow-by are the major concern of the automotive industry and all of this happens at the Piston-ring pack assembly. So, through this work using 3D CFD software Star CCM+, the better understanding of the fluid mechanics in the Piston-ring pack is addressed, which could be helpful for the broad range of R&D and can also provide base for the further CFD research. A two-dimensional geometric section of the Piston-ring pack has been selected of the Gasoline engine having the operating condition of full load. The 2D Piston-ring pack has been modelled with the transient condition of Pressure and Temperature over the cycle. Dynamic mesh has been created for the kinematics and dynamics of the Piston and rings. Gas flow and oil flow in the Piston-ring pack was analysed with the dependent parameters like absolute pressure for 3 cycles, which was also compared with available MBS (Multi-body Simulation) results, Mass flow rate. Based on that, the flow pattern of the gas and oil was captured with different transport mechanism i.e. reverse flow, inertia force, squeezing, pumping. Hydrodynamic friction power loss was also studied between ring-liner gap due to shear stress in lubricating oil and the results was compared with MBS results. The resultant axial and radial force acting on the rings was also calculated and compared for all the 3 cycles. This work is the comprehensive investigation of the Piston-ring pack (2D-model) for all the important mechanism could take place in the Piston-ring pack. It constitutes a major step in understanding oil and gas dynamics in the Piston-ring pack.
This work analyzes and evaluates different approaches to translate UML state machines into C++ code. The first part of this thesis covers the ground of transforming information of a source language to a target language. It addresses the basics of language theory and different approaches of language transformation. The second part examines the properties and formalisms of state machines to value their characteristics for further reuse in the development cycle. The third part disassembles the programming language C++ with all its quirks and oddities. The last part puts all mentioned pieces together. Beyond this approach the thesis tries to point out several concepts of language engineering to ease the use of software languages for the language user as well as the language engineer. It scrutinizes diverging solutions with the resulting consequences.
Qualification of tool to tool matching of a color image inspection system for wafer backsides
(2010)
This diploma thesis deals with the qualification of the color image inspection of a wafer backside inspection system as a means of defect detection. Currently, the color image is used to provide a quick overview and visual impression of the wafer backside. The goal of the diploma thesis is to qualify the color image inspection to comply with all requirements of tool to tool matching. As a given standard, the existing hardware design of the wafer backside inspection system can not be altered and has to be used in its current state. Potential causes of uncertainty introduced by this hardware design will be accounted for. The main focus of the diploma thesis will be the investigation of the three main factors influencing the color image inspection. These factors are the detected intensity, the contrast and the image sharpness. Their adjustability, repeatability, reproducibility and effect on the tool to tool matching are going to be quantified, necessary improvements will be formulated and the implementation of these improvements is going to be tested. Additionally, new and existing software factors influencing defect detection will be investigated with regard to their effect on the tool to tool matching. Lastly, based on the findings of the diploma thesis, a series of suggestions will be formulated. They will help to plan additional qualification steps, if necessary, and provide the basis for composing a guideline to achieve tool to tool matching for all systems in the field.
The aim of this work is the analysis of characteristic properties of fuel jets in internal combustion engines for steady and transient spray velocities by means of CFD. The simulations were done using DNS. The used software is Gerris. Calculations with different Reynolds numbers, Weber numbers and density ratios were done. The adaptations of an already existing simulation file included the implementation of necessary output capabilities. The analysis of obtained data was done by previously created macros. The obtained non-dimensional results give information on penetration, number of droplets, SMD and droplets size distribution. One calculation was compared to experimental data.
This thesis presents a case study conducted at the Potsdamer Platz intersection in Berlin, focusing on the effects of transitioning from fixed phase control to Vehicle Actuated Signal Control (VA). The objective is to optimize the signal control system to improve traffic flow and reduce waiting times for motorists. Traffic data from the Berlin authority is analyzed, and various stage sequences are developed using the signal planning tool LISA+ and simulated using VISSIM microsimulation. The impact of the proposed vehicle-actuated signal control system on overall traffic performance is evaluated by comparing the Level of Service (LOS) with the existing fixed-time plan. The analysis reveals the limitations of the proposed approach and identifies areas for further improvement in control systems. Results indicate that the VA system shows comparable effectiveness to the current scenario only at lower volume, with room for enhancement. By considering two variations of the signal group from the current sequence, valuable insights are gained into the effects of the proposed changes. The results contribute to the development of optimized signal control strategies, aiming to create safer and more efficient traffic environments at urban intersections.
Finite element Analysis is a powerful tool that enables a thorough examination of the physical and mechanical aspects of various objects, yielding insights that would otherwise be difficult to obtain. In the context of the guitar industry, this technology can be used to determine the role of internal bracing structures with a high degree of precision. Specifically, FEM is commonly utilized to analyze the natural vibration frequency of guitars and to gain a better understanding of their vibrational behaviour. Although there are many sources that describe the impact of braces on the natural frequencies of guitar tops, there exists a paucity of research that delves into how these structures achieve their effects.
The purpose of this paper is to employ FEM to examine the effect of braces on the soundboard and to contrast the results with those obtained from an actual soundboard fabricated by the author. Through simulation, we aim to elucidate the influence of various factors such as position, height, and profile on the soundboard's performance. However, it is important to note that there may be discrepancies between the simulation results and the actual performance of the soundboard owing to measurement errors and constraints associated with manual production. As a result, the data generated by this study should not be regarded as reference data.
Radiation measurements have been employed in research for close to a century and over the last years a growing interest for application in workshops has developed. However, some problems of standardization mainly pertaining to room acoustics arise, which make measurement results comparable only to those conducted under the same circumstances. Our aim is to modify measurement procedure and rig design in such a way, that comparable results can be attained even in acoustically non-ideal spaces. A specialized rig for violin radiation measurements was constructed leaning on partial automation to allow for the application of thick curtains as a means of decoupling measurements from the surrounding room. Trial runs in an acoustically challenging space - our living room - as well as in a small studio environment were conducted.
Improvements of measurement results were obtained for frequencies above 800 Hz, measurements were influenced significantly by the surrounding room below that threshold. As a result, calculated features were heavily skewed by the environment, rendering obtained data useless for statistical purposes. Therefore additional measurements of six instruments were performed in a small studio environment and features as defined in the literature calculated. Correlations with listening test results concerning the evenness of sound as well as structural instrument parameters were obtained. Listening test results were inconclusive, which is proposed to be attributed to the narrow range of instrument quality available for trials. Some interesting correlations of measurement features with structural parameters could be obtained and further vetted through the comparison with a second set of data. Three correlations were found which were significant or approaching significance in both groups, giving a more complete connection from instrument making to sound perception. Furthermore we have found some interesting correlations of structural parameters, giving insights into maker decisions and corroborating some workshop wisdoms.
Unnoticed by many, a congenital cardiac anomaly is in existence, which can be found in over a quarter of the total population. It is associated with the occurrence of strokes, migraine with and without an aura and feelings of faintness.This refers to the atrial septal defect (ASD) or one of its forms, the patent foramen ovale (PFO). Eventhough this illness, depended on the manifestation, can remain without any symptoms, it should still be considered to treat the condition, to prevent possible complications in a higher age. In recent years, based on several studies, a closure of ASDs and PFOs has been established as the preferred approach and is therefore increasingly replacing the medicinal treatment. In the context of this Master
BIM (Building information modeling) is becoming a reliable method for the planning, design, implementation, and maintenance stages of construction projects due to its ability to improve the quality of project stages, reduce project time, and ensure costs. From 2000 onwards, the trend of using BIM method increased in the world. And in the last decade, many developed countries have introduced BIM as a reasonable and efficient method with the aim of optimizing project stages, and many employers have paid attention to training and persuading consulting and contracting companies.
In the meantime, the BIM method is constantly being updated. Many researchers are looking to modify existing sub-methods to help the project achieve all of the great BIM goals.
Although BIM has great goals such as those mentioned, in some cases, projects are not able to achieve all of them for various reasons.
This thesis has put its hypothesis on the existence of deficiencies in the content of the EIR (Employer's Information Requirements) document and its writing methods.
This document, which is a kind of project guide in BIM format, is compiled by the client and its task is to announce the needs of the client to the members involved in the project and to clarify the different stages of the project. In many construction projects, due to the complexity of the EIR, the employer's lack of attention to some information, or the failure to include the opinions and views of the project's stakeholders in the writing of this document, the EIR cannot fulfill its key role with its maximum potential performance in the project.
This thesis is written with the aim of finding a comprehensive solution to maximize the power of the BIM method in a project through correct and complete document writing.
Also, this thesis seeks to prove its claims by focusing on the ABS 38 project as a case study. In addition, a literature review on important and key issues in the field of BIM and EIR documents has been done. After that, a scoring system (Relative rating method) was used to find the best variant and compare it to prove the proposed hypothesis.