open_access
Refine
Document Type
- Article (64)
- Book (13)
- Part of a Book (10)
- Working Paper (5)
- Report (4)
- Other (2)
Institute
Language
- English (57)
- German (37)
- French (1)
- Multiple languages (1)
- Portuguese (1)
- Spanish (1)
Is part of the Bibliography
- yes (98)
Liquid deposition modeling is an energy-efficient, additive manufacturing process for pasty materials. Physical material properties were determined for a water-based paste consisting of the binder carboxymethyl cellulose and wood flour. A continuously operating dual screw extruder was developed, which was used to manufacture a table frame with a height of 18 cm.
Based on a real-world application in the semiconductor industry, this article models and discusses a hybrid flow shop problem with time dependencies and priority constraints. The analyzed problem considers a production where a large number of heterogeneous jobs are processed by a number of machines. The route that each job has to follow depends upon its type, and, in addition, some machines require that a number of jobs are combined in batches before starting their processing. The hybrid flow model is also subject to a global priority rule and a “same setup” rule. The primary goal of this study was to find a solution set (permutation of jobs) that minimizes the production makespan. While simulation models are frequently employed to model these time-dependent flow shop systems, an optimization component is needed in order to generate high-quality solution sets. In this study, a novel algorithm is proposed to deal with the complexity of the underlying system. Our algorithm combines biased-randomization techniques with a discrete-event heuristic, which allows us to model dependencies caused by batching and different paths of jobs efficiently in a near-natural way. As shown in a series of numerical experiments, the proposed simulation-optimization algorithm can find solutions that significantly outperform those provided by employing state-of-the-art simulation software.
ALADIN – Generator für Aufgaben und Lösung(shilf)en aus der Informatik und angrenzenden Disziplinen
(2022)
Structures made of the thermoplastic polymer polyether ether ketone (PEEK) are widely used in dynamically-loaded applications due to their high-temperature resistance and high mechanical properties. To design these dynamic applications, in addition to the well-known stiffness and strength properties the vibration-damping properties at the given frequencies are required. Depending on the application, frequencies from a few hertz to the ultrasonic range are of interest here. To characterize the frequency-dependent behavior, an experimental approach was chosen and applied to a sample polymer PEEK. The test setup consists of a piezoelectrically driven base excitation of the polymeric specimen and the non-contact measurement of the velocity as well as the surface temperature. The beam’s bending vibrations were analyzed by means of the Timoshenko theory to determine the polymer’s storage modulus. The mechanical loss factor was calculated using the half-power bandwidth method. For PEEK and a considered frequency range of 1 kHz to 16 kHz, a storage modulus between 3.9 GPa and 4.2 GPa and a loss factor between 9 × 10−3 and 17 × 10−3 were determined. For the used experimental parameters, the resulting mechanical properties were not essentially influenced by the amplitude of excitation, the duration of excitation, or thermal degrad.ation due to self-heating, but rather slightly by the clamping force within the fixation area.
Analgesic drug use of recreational and competitive badminton players: Starting points for prevention
(2021)
Die Publikation analysiert die Arbeitssituation im Home-Office in Deutschland und identifiziert Anforderungen an Führungskräfte und Mitarbeiter. Führungskräfte sollten den partizipativen Führungsstil anwenden, die Fähigkeit zu motivieren besitzen sowie moderne Technologien nutzen. Mitarbeiter werden zu Eigenmotivation, Feedback und eigenverantwortlichem Arbeiten angehalten. Positive Aspekte der Telearbeit sind Flexibilität und Zeitersparnis, während fehlende Tätigkeitseignung und mangelnde Interaktion als Nachteile gelten. Die Handlungsempfehlungen, welche in Form von Checklisten gestaltet sind, beschreiben die Anforderungen an Führungskräfte und Mitarbeiter an die Telearbeit. Das Fazit in Kapitel drei rundet die Ergebnisse ab.
Das Hauptziel der Arbeit ist die Analyse der o.g. Anforderungen und die Ableitung von Handlungsempfehlungen für das Home-Office.
This paper provides a critical reading of Janek Wasserman’s The Marginal Revolutionaries: How Austrian Economists Fought the War of Ideas. Wasserman depicts the evolution of the Austrian School from the 1860s until today, a particularly illuminating narrative for the readers of this journal. The breadth of portrayed economists, their cultural embeddedness in Austrian and US contexts, and the complexity of configurations across the school’s generations create a rich and readable story. The last third of the book suffers from allegations about the ideological agenda and institutional power of the Austrian economists which sometimes lack sufficient substantiation. The paper indicates how both in their theorizing and in their political activities, the Austrian economists can be seen as reformers instead of revolutionaries, and as constitutionalists instead of anti-democrats. Despite these disagreements, Wasserman’s portrayals evoke largely fair and challenging impulses both to scholars working in the Austrian research program and to those interested in the Austrian School’s long history, regardless of one’s ideological positions.
This paper presents an analytical method for determining the bending stresses and deformations in prismatic, noncircular profile shafts with trochoidal cross sections. The so-called higher trochoids can be used as form-fit shaft-hub connections. Hybrid (mixed) higher trochoids (M-profiles) were developed for the special application as a profile contour for the form-fit shaft and hub connections in an earlier work by the author. M-profiles combine the advantages of the two standardised polygonal and spline contours, which are used as shaft-hub connections for the transmission of high torques. In this study, the geometric and mechanical properties of the higher hybrid trochoids were investigated using complex functions to simplify the calculations. The pure bending stress and shaft deflection were determined for M-profiles using bending theory based on the theory of mathematical elasticity. The loading cases consisted of static and rotating bends. Analytical, numerical, and experimental results agreed well. The calculation formulas developed in this work enable reliable and low-cost dimensioning with regard to the stresses and elastic deformations of profile shafts subjected to bending loads.
OpenStreetMap (OSM) is a large open database for geographic data created and maintained by volunteers. OSM's main data use is rendering an extremely detailed map of the world. Data quality is an important issue for applications like routing of pedestrians to public transport facilities. In this report we describe different schemes for mapping bus stops in OSM and we provide statistics on usage of those schemes, the good ones and the not so good ones.
Für viele Menschen ist das Pferd ein wichtiger Begleiter in der Freizeit, im Profisport oder auch in der Landwirtschaft. Gerade aber für die prozentual am häufigsten vertretenen Freizeitreiter wird es immer schwieriger, geeignete Anbieter für die Pflege und Bearbeitung der Hufe und das Training zu finden. Sei es die stetig steigende Variabilität von Hufbearbeitungszuständen wie z.B. Barhuf, Eisen- oder Aluminiumbeschlag oder Kunststoffeisen bei immer weniger verfügbaren und fachgerecht ausgebildeten Schmieden oder die Vielzahl an Trainingsmöglichkeiten wie z.B. Klassisch-Barock, Western, Alt-Californisch, Vaquero, Englisch oder Natural Horsemanship. Bei dieser kontinuierlich steigenden Anzahl an Varianten und Strömungen, aber auch schwieriger Dienstleistungssituation ist es wichtig, gerade Freizeitreitern eine sichere und verlässliche, aber auch qualitativ hochwertige Betreuung zur Verfügung zu stellen. Im Rahmen dieses Businessplanes soll dabei ein kooperatives Angebot aus Hufpflege und Natural Horsemanship Training in seinen Vor- und Nachteilen erörtert werden.
Certifying Fully Dynamic Algorithms for Recognition and Hamiltonicity of Threshold and Chain Graphs
(2023)
Solving problems on graphs dynamically calls for algorithms to function under repeated modifications to the graph and to be more efficient than solving the problem for the whole graph from scratch after each modification. Dynamic algorithms have been considered for several graph properties, for example connectivity, shortest paths and graph recognition. In this paper we present fully dynamic algorithms for the recognition of threshold graphs and chain graphs, which are optimal in the sense that the costs per modification are linear in the number of modified edges. Furthermore, our algorithms also consider the addition and deletion of sets of vertices as well as edges. In the negative case, i.e., where the graph is not a threshold graph or chain graph anymore, our algorithms return a certificate of constant size. Additionally, we present optimal fully dynamic algorithms for the Hamiltonian cycle problem and the Hamiltonian path problem on threshold and chain graphs which return a vertex cutset as certificate for the non-existence of such a path or cycle in the negative case.
Conceptual Approach to an AI-Based Adaptive Study Support System for Individualized Higher Education
(2023)
In the context of the digital transformation, the targeted implementation of AI-based or AI-supported technologies in "teaching & learning" as well as "administration & service" holds considerable potential for organizational change and quality enhancement for higher education institutions. The use of AI in higher education teaching and services lags behind the level in research. Therefore, holistic solutions must be planned and implemented in unity of teaching and research for the AI-based support of the stakeholders’ inclusive administration, the further development or the establishment of new digital study programs and offers as well as the prospective qualification of university staff in the field of AI. The solutions must be analyzed, systematized, and structured to generate a conceptual approach via an integrated architecture with adaptive services.
This paper is an evolution of the concept presented at the Learning Ideas Conference 2022 and includes, in addition to explanations of the current state of the arts, the presentation of a systems-oriented approach for AI in higher education as well as the conception of the student lifecycle management at the author’s university. The paper ends with the presentation of a concept regarding a decision support system for individualized studying.
This article presents a cost-effective ultraviolet-ozone cleaner (UV/O3 Cleaner) for surface pre-treatment of substrates in the field of semiconductor technology. The cleaner consists of two chambers, the upper one contains the electronics, including the time counter. The lower chamber contains the two UV sterilisation lamps and a UV reflector of anodized aluminium, which confines the area of high Ozone concentration in the area of interest. The device is successfully used for surface cleaning and modification of different materials. To this end, the two important wavelengths 253.7 nm (excitation of organic residues) and 184.9 nm (production of ozone from the atmospheric environment as a strong oxidant) were first detected. The effectiveness of UV/O3 cleaning is demonstrated by improving the properties of indium tin oxide (ITO) for OLED fabrication. The contact angle of water to ITO could be reduced from 90° to 3° and for diiodomethane, it was reduced from 55° to 31° within the 10 min of irradiation. This greatly improved wettability for polar and non-polar liquids can increase the flexibility in further process control. In addition, an improvement in wettability is characterized by measuring the contact angles for titanium dioxide (TiO2) and polydimethylsiloxane (PDMS). The contact angle of water to TiO2 decreased from 70° to 10°, and that of diiodomethane to TiO2 from 54° to 31°. The wettability of PDMS was also greatly increased. Here, the contact angle of water was reduced from 109° to 24° and the contact angle to diiodomethane from 89° to 49°.
Article Highlights
We report a cost-effective dry-cleaning device for surface cleaning and modification based on ultraviolet-ozone irradiation.
Contact angle measurements show an increase of wettability for different materials due to surface modification.
The UVO3 pre-treatment improves layer formation and optoelectrical properties of OLEDs.
The book is the first of four volumes on data science and artificial intelligence. This first volume covers fundamentals of data science: an introduction to Python programming, software libraries for data management, techniques for working with big data. It contains many exercises and projects with real-world data.
The book is the second of four volumes on data science and artificial intelligence. This second volume covers data visualization tool and techniques as well as fundamentals of supervised machine learning: linear regression, artificial neural networks, support-vector machines, decision trees, ensemble methods and more.
Models of artificial root canals are used in several fields of endodontic investigations and pre-clinical endodontic training. They allow the physical testing of dental treatments, the operating of instruments used and the interaction between these instruments and the tissues. Currently, a large number of different artificial root canal models exist whose geometry is created either on the basis of selected natural root canal systems or to represent individual geometrical properties. Currently, only a few geometric properties such as the root canal curvature or the endodontic working width are taken into consideration when generating these models. To improve the representational capability of the artificial root canal models, the aim of the current study is therefore to generate an artificial root canal based on the statistical evaluation of selected natural root canals. Here, the approach introduced by Kucher for determining the geometry of a root canal model is used, which is based on the measurement and statistical evaluation of the root canal center line’s curvatures and their cross-sectional dimensions. Using the example of unbranched distal root canals of mandibular molars (n = 29), an artificial root canal model representing the mean length, curvature, torsion and cross-sectional dimensions of these teeth could be derived.
Development and Characterization of a Dispersion-Encoded Method for Low-Coherence Interferometry
(2022)
This Open Access book discusses an extension to low-coherence interferometry by dispersion-encoding. The approach is theoretically designed and implemented for applications such as surface profilometry, polymeric cross-linking estimation and the determination of thin-film layer thicknesses. During a characterization, it was shown that an axial measurement range of 79.91 µm with an axial resolution of 0.1 nm is achievable. Simultaneously, profiles of up to 1.5 mm in length were obtained in a scan-free manner. This marked a significant improvement in relation to the state-of-the-art in terms of dynamic range. Also, the axial and lateral measurement range were decoupled partially while functional parameters such as surface roughness were estimated. The characterization of the degree of polymeric cross-linking was performed as a function of the refractive index. It was acquired in a spatially-resolved manner with a resolution of 3.36 x 10-5. This was achieved by the development of a novel mathematical analysis approach.
Die Publikation untersucht die Einordnung der Führung in den Managementkontext und stellt das Konzept "Digital Leadership" als neue Managementkompetenz vor. Sie identifiziert Grundanforderungen an die Führungsrolle und betont die Herausforderungen für Führungskräfte in der digitalen Arbeitswelt. Dabei wird die Vielfalt der Grundanforderungen an die Führung aufgezeigt, indem die Wahl des Führungsstils, der Faktor „Motivation“ und das KLARA-Prinzip hervorgehoben werden. Der digitale Wandel erfordert die Anpassung der führenden Personen an die Herausforderungen der digitalen Transformation und die Fähigkeit, sich in verschiedene Führungsrollen hineinzuversetzen.
Der Beitrag reflektiert die Erfahrungen mit einem neuen Weiterbildungsformat, den Digital Workspaces, welche im Frühjahr 2020 im Rahmen des Verbundprojektes Digitalisierung der Hochschulbildung in Sachsen (DHS) eingeführt wurden. Dabei werden neben pandemiebedingten Herausforderungen und Charakteristika des Formats Potenziale der Digital Workspaces aufgezeigt und ein Blick in die Zukunft dieses hochschuldidaktischen Angebots geworfen.
Dissipation energy based parameter identification of anisotropic linear viscoelastic composites
(2020)
The current work presents a relaxation analysis based procedure to identify effective material parameters of the multiaxial generalized Maxwell model (GMM) by a numerical homogenization of the microscopic dissipation energy density for anisotropic linear viscoelastic composites. The employed GMM enables the derivation of a thermodynamically consistent constitutive law and a function of the dissipation energy density for direction‐dependent viscoelastic materials. The identity of this energy function to the microstructure's homogenized dissipation energy density is utilized for the identification of effective relaxation times. Furthermore, the identified relaxation times enable a simple determination of the remaining stiffness parameters. Finally, the presented procedure is demonstrated and evaluated for a randomly endless fibre‐reinforced plastic with a polymer matrix exhibiting a significant viscoelastic behaviour.
Effect of acoustic excitation on fiber-reinforced polypropylene and the influence on melt viscosity
(2021)
The paper describes a novel technological approach to influencing the rheological properties of thermoplastic materials exposed to acoustic energy. The flow behavior of polypropylene with different mass percentages of glass fibers is investigated in a parallel plate rheometer under high-frequency longitudinal excitation. The influence of oscillation frequency on the melt viscosity is explained by means of shear thinning criteria. The dependence of the oscillation shape using sinusoidal excitation on shear thinning as a function of different fiber reinforcement percentages is also investigated. A phenomenological view describes the mutually influencing parameters with regard to different material compositions and different excitation frequencies over the time course of the rheometric measurement. Interacting relationships are analyzed and discussed and the potential of the actuator system to influence the plastic melt is worked out. Based on this, a technological approach follows which describes the transfer of an oscillating mold surface to plastics processing methods, which, especially in the case of energy-intensive injection molding technology, leads to the expectation of possible resource efficiency in energy and material.
The aim of this study was to investigate the antimicrobial efficacy of different disinfection protocols in a novel Enterococcus faecalis biofilm model based on a visualization method and to evaluate the potential alteration of dentinal surface. A total of 120 extracted human premolars were allocated to 6 groups with different irrigation protocols. The assessment of the effectiveness of each protocol and the alteration of dentinal surface were visualized by using SEM and fluorescence microscopy (DAPI). A dense E. faecalis biofilm with a penetration depth of 289 μm (medial part of the root canal) and 93 μm (apical part) validated that the biofilm model had been successfully implemented. A significant difference between the 3% NaOCl groups and all the other groups in both observed parts of the root canal (p < 0.05) was detected. However, the SEM analysis revealed that the dentinal surface in the 3% NaOCl groups was severely altered. The established biofilm model and the visualization method based on DAPI are appropriate for bacterial quantification and evaluation of the depth effect of different disinfection protocols in the root canal system. The combination of 3% NaOCl with 20% EDTA or MTAD with PUI allows the decontamination of deeper dentine zones within the root canal but simultaneously alters the dentinal surface.
Emotionale Kompetenzen und psychische Gesundheit: Eine Querschnittstudie in Gesundheitsberufen
(2021)
Hintergrund
Im Jahr 2020 waren 5,7 Mio. Menschen in Gesundheits- und Pflegeberufen tätig. Der Kontakt mit anderen Menschen ist in diesen Berufen Teil des Arbeitsauftrags und der Mensch ist der Arbeitsgegenstand.
Ziel der Arbeit
Das Ziel der Arbeit ist die Untersuchung der Auswirkung von psychischer Belastung (Arbeitsintensität, Spielräume), emotionaler Erschöpfung und emotionalen Kompetenzen (Regulation) auf das psychische Wohlbefinden bei Beschäftigten in Gesundheitsberufen.
Material und Methoden
Die Erhebung der Querschnittstudie von 624 Beschäftigten aus der Altenpflege und dem Rettungsdienst (72,5 % weiblich) erfolgte im Rahmen zweier Projekte zur betrieblichen Gesundheitsförderung. Zum Einsatz kamen standardisierte validierte Verfahren, welche mittels Korrelationsanalysen sowie einer hierarchischen Regressionsanalyse zur Vorhersage des psychischen Wohlbefindens ausgewertet wurden.
Ergebnisse
Hohe Arbeitsintensität, hohe Spielräume, hohe emotionale Erschöpfung und eine hohe emotionale Kompetenz (Regulation) tragen zur Aufklärung des psychischen Wohlbefindens bei (R2 = 33 %).
Schlussfolgerung
Anhand der Ergebnisse wird deutlich, dass neben dem Erleben von Arbeit und Gesundheit auch emotionale Kompetenzen einen Einfluss auf die psychische Gesundheit bei Beschäftigten in Gesundheitsberufen haben. Damit leistet die Studie einen wichtigen Beitrag für die Entwicklung von Maßnahmen des betrieblichen Gesundheitsmanagements in diesen Berufsgruppen.
This paper presents numerical analysis of the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice. Additionally, to provide estimates in interior and exterior domains, two different regularisations of the discrete fundamental solution are considered. Estimates for the absolute difference and lp‐estimates are constructed for both regularisations. Thus, this work extends the classical results in the discrete potential theory to the case of a rectangular lattice and serves as a basis for future convergence analysis of the method of discrete potentials on rectangular lattices.
Dynamically loaded structures made of thermoplastic polymers have been extensively exploited in several demanding industries. Due to the viscoelastic and thermal properties of thermoplastic polymers, self-heating is generally inevitable, especially during dynamic deformations at high frequencies. Therefore, the thermoplastic polyether ether ketone (PEEK), with its high temperature resistance and high specific strength, is a particularly ideal candidate for dynamically loaded applications. Using scanning laser Doppler vibrometry and infrared thermography, an experimental study of the vibration characteristics and the vibration-induced heating of flat-sheet PEEK specimens was carried out. The specimens were base-excited by means of a piezoelectric actuator at high frequencies in the range between 1 and 16 kHz. As a result, a maximum temperature rise of approximately 6.4 K was detected for the highest investigated excitation. A high correlation between the spatial distribution of the velocity along the beam’s axial direction and the resulting temperature increase was measured. To summarize, the occurring self-heating of PEEK due to the dissipation of vibrational energy has to be critically considered for dynamically loaded structural applications, especially areas with high displacement amplitudes, such as antinodes, which yield the highest temperature increase.
Experimental tests on the type-approval of motor vehicles with regard to safety belt anchorages, ISOFIX anchorages and ISOFIX top anchorages have been carried out in accordance with Regulation No. 14 UNECE. From the design stage, the safety belt anchorages must comply with the requirements for the installation of a safety belt and reduce slipping and damage to the belt while wearing it. These can be components of the seat structure or of the body's resistance structure, which have the role of fastening the seat belts. The position of the anchor points is determined by the R point. The R point is defined as the seat reference point on the seat. This point is set by the vehicle manufacturer for each seat in the vehicle. In this paper, two models of chairs were tested. Both seat models are equipped with seat belts anchored at three anchor points. Seat belt anchorages were tested simultaneously using parallel force devices. These traction devices are placed on the seat cushion and are pressed into the seat back. The pulling device has a vertical pulling arm, which has the role of anchoring the steel wire cables. Two test forces are applied simultaneously to the anchor points during the test.
This study aimed to investigate the component structural behaviour and response under overturned truck crash that subsequently collides with road-side pole or tree. The safety of the truck occupants in an accident is very important and should be considered in the process of cabin design. Specific focus will be on the structural integrity of the truck cabin in response to a collision with a cylindrical pendulum. In the past, dynamic analysis was done by real world testing. Nowadays crash simulation is proven to be much more efficient by being a virtual representation of destructive crash impact and providing opportunities to reduce the number of physical prototypes consumed for design verification, thus reducing development time. According to cab strength tests (ECE R29), the cabin body of the truck shall be attached to the chassis in such a way that in the event of impact it ensures a sufficient survival space and eliminates the risk of injury. This paper investigates the FE (finite element) simulation of a frontal impact on the cabin structure to validate the cabin according to the ECE regulation 29 tests. The study also includes the assessment of the energy absorption capabilities of the cabin during the pendulum impact. The pendulum impact was carried out using Ansys LS-Dyna explicit solver to evaluate the cabin strength under the loads.
Stefan Kolev zeichnet in seinem Beitrag die Geschichte und Bedeutung des schillernden Begriffs »Neoliberalismus« nach, welcher vielfach als Grund allen Übels gegen liberales Denken und Politik in Stellung gebracht wird. Kolev plädiert dafür, dass der Liberalismus sich immer wieder erneuern muss, also stetig neue Neoliberalismen benötigt.
Die Publikation untersucht Home-Office im Kontext des "Digital Leadership", erörtert technische, organisatorische und führungspolitische Anforderungen und beleuchtet Chancen sowie Risiken dieser Arbeitsform. Es wird ein Überblick zur aktuellen Home-Office Situation in Deutschland gegeben. Zudem werden die Unternehmen "Compart AG" und "Microsoft" als Best-Practice-Beispiele hervorgehoben. Ziel ist es, die Voraussetzungen und erfolgreiche Umsetzungsmöglichkeiten des Home-Office zu analysieren.
LEGO robotics sets are a well established tool for teaching programming in undergraduate courses. Starting with the now outdated EV3 set LEGO provided a Python programming interface and (inofficial) Linux support. The current LEGO Spike Prime set still provides Python programming, but no direct support for Linux.
In this report we collect and extend information on controlling Spike Prime robots from Linux hosts. We cover access to a robot's Python interpreter and code transfer as well as bidirectional robot-to-host communication via USB and Bluetooth. Results may be extended to robot-to-robot communication via Bluetooth.
Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling
(2020)
Hybrid manufacturing, which, e.g., combines additive manufacturing with conventional machining processes, can be a way of overcoming limitations currently encountered in additive manufacturing. Cryogenic milling might be a viable option for hard-to-cut materials, as it leaves a contamination-free surface and can increase surface quality and tool life compared to conventional cooling concepts. In this study, the influence of cryogenic milling with carbon dioxide on titanium Ti-6Al-4V specimens manufactured with laser metal deposition (LMD) was investigated regarding tool wear and surface integrity in comparison to dry machining and machining with cooling lubricants. Moreover, additional layers of material were deposited on top of conventionally and cryogenically machined surfaces by means of LMD. The interface zone was then examined for defects. The milling process was closely monitored by means of thermal and high-speed imaging. Optical and tactile surface analysis provided evidence that lower roughness values and improved surface qualities could be obtained with cryogenic machining in comparison to dry machining. Moreover, significantly less tool wear was observed when a cryogenic cooling medium was applied. Although the utilization of conventional cooling lubricants resulted in satisfying surface qualities, substantial residual contamination on the milled surface was detected by means of fluorescence analysis. These contaminants are suspected to cause defects when the next layer of material is deposited. This is supported by the fact that pores were found in the weld bead applied on top of the milled specimens by means of LMD. Conversely, cryogenic machining resulted in very clean surfaces due to the residue-free evaporation of the coolant. Hence, a good metallurgical bonding between the weld bead and the milled substrate could be achieved. The results indicate the great potential of cryogenic milling in hybrid manufacturing, especially in terms of intermediate machining, as it provides residue-free surfaces for subsequent material deposition without an additional cleaning step and can significantly prolongate tool life.
The atomizing gas dynamics and the applied process energy have a significant influence on the produced particles. The melting process of the two wires can be influenced by current modulation. As for arc welding processes, more and more electronic and software-controlled machines are being used for arc spraying and will have replaced conventional power sources in the future. Due to the highly dynamic, fast regulating computing technology in the latest energy source, technology arcs can be operated with different current forms and types. The modern machines allow process-stable, reproducible variation of the particles and heat input into the substrate. Constant and pulsed current can be used as current forms. Usable current types are direct current (DC) and alternating current (AC). The electrical parameters must be analyzed to evaluate the process behavior. The consumable used is a wire-shaped iron-based alloy with a diameter of 1.6 mm. Relevant process parameters such as basic current Iground, pulse current Ipulse, pulse duration tpulse, impulse frequency fpulse, and alternating current frequency, fAC, are varied and recorded using appropriate measurement technology. The aim is to change the process performance and thereby the particle formation in a broad band. High-speed images are used to observe the arc and the deposition process. In addition, particle sizes are determined.
The intention of the paper is to consider the role of technologies used to overcome the COVID-19’s challenges in higher education. On investigating, it has been found that the digital strategies utilizing innovation technologies help students to adapt to pandemic consequences. This study enlightens the various technologies that assist systems of healthcare and education in diverse aspects to outlive against COVID-19. Furthermore, the technological shift of world economy that happened during the pandemic and its influence in the society is discussed. Besides the considered innovation technologies, this paper also deals with changes that have taken place in education system of Kazakhstan in pandemic circumstances. Alongside our suggested solution for further educational process issues is also presented.
A detailed review of the literature is done on COVID-19, digital technologies in education, blended learning using appropriate keywords on SCOPUS, Springer, Science Direct, and Google Scholar. To get insights some relevant sites and blogs are also taken into account. We have identified technologies used in Kazakhstan that play an important role now.
There have been chosen exploratory and conclusive research design. Fifty-nine students provided qualitative responses; ninety-eight students and graduates participated in quantitative survey. The results of study has shown students’ increased awareness concerning blended learning.
The scientific novelty lies in the description of the experience gained by higher schools during the quarantine. We believe that in the future, blended learning should be used largely. The innovations in the learning process cover two areas. The first is related to software used. It is like creation of a virtual university that facilitates communication between students and teachers. The second area correlates with content, without which any innovation will fail.
Integration und Migration werden in Deutschland nie an Bedeutung verlieren. Ob als Gastarbeiter in den 1950er Jahren, Flüchtling in den 1970er Jahren oder Vertragsarbeiter in den 80ern, Deutschland hat über Jahre hinweg zahllose Migranten aufgenommen. Doch keine Migrantengruppe wird derzeit in den Medien positiver erwähnt als die der Vietnamesen.
Ziel dieser Arbeit ist es aufzuzeigen, wie sich die Integration der Vietnamesen aus deutscher und vietnamesischer Sicht unterscheiden bzw. ähneln. Dazu wurden folgende Forschungsfragen gestellt: Sehen die deutschen Bürger die Vietnamesen tatsächlich als voll integriert? Und wie schätzen die Vietnamesen selbst ihre Integration ein? Um diese Fragen zu beantworten, sind vier qualitative Interviews mit zwei deutschen Staatsbürgern deutscher Herkunft, einer Vietnamesin, die in die damalige DDR als Vertragsarbeiterin kam, und einer Vietnamesin zweiter Generation, die in Deutschland geboren und aufgewachsen ist, durchgeführt worden. Die Interviews wurden auf Meinungen im Hinblick auf die vietnamesische Integration untersucht. Im Großen und Ganzen kann gesagt werden, dass trotz einiger Divergenzen hinsichtlich der geäußerten Sichtweisen, die Interviewten fast einstimmig der Meinung sind, Vietnamesen seien gut in die deutsche Gesellschaft eingegliedert - auch wenn das, was sie unter Integration verstehen, teilweise stark von den wissenschaftlichen Definitionen abweicht.
Innerhalb der vorliegenden Untersuchung werden die interkulturellen Beobachtungen, die deutsche Studierende beim Praktikum in spanischen Unternehmen machen, analysiert. Im ersten Teil geht es um die Art und Weise, wie deutsche Studierende ihren Praktikumsplatz suchen und im zweiten Teil um die Analyse der interkulturellen Erfahrungen, v. a. der Konfliktsituationen, im Unternehmen. Der dritte und letzte Teil befasst sich mit der Frage, inwiefern die vorhergehende interkulturelle Vorbereitung den Studierenden im interkulturellen Alltag von Nutzen erscheint. Für die Untersuchung wurden die Praktikumsberichte über die persönlichen Erlebnisse im spanischen Ausland gemäß der Methode der qualitativen Inhaltsanalyse eingehend analysiert.
Objectives: Evidence-based clinical guidelines play an important role in healthcare and can be a valuable source for quality indicators (QIs). However, the link between guidelines and QI is often neglected and methodological standards for the development of guideline-based QI are still lacking. The aim of this qualitative study was to get insights into experiences of international authors with developing and implementing guideline-based QI.
Setting: We conducted semistructured interviews via phone or skype (September 2017–February 2018) with guideline authors developing guideline-based QI.
Participants: 15 interview participants from eight organisations in six European and North American countries.
Methods: Organisations were selected using purposive sampling with a maximum variation of healthcare settings. From each organisation a clinician and a methodologist were asked to participate. An interview guide was developed based on the QI development steps according to the ‘Reporting standards for guideline-based performance measures’ by the Guidelines International Network. Interviews were analysed using qualitative content analysis with deductive and inductive categories.
Results: Interviewees deemed a programmatic approach, involvement of representative stakeholders with clinical and methodological knowledge and the connection to existing quality improvement strategies important factors for developing QI parallel to or after guideline development. Methodological training of the developing team and a shared understanding of the QI purpose were further seen conducive. Patient participation and direct patient relevance were inconsistently considered important, whereas a strong evidence base was seen essential. To assess measurement characteristics interviewees favoured piloting, but often missed implementation. Lack of measurability is still experienced a serious limitation, especially for qualitative aspects and individualised care.
Conclusion: Our results suggest that developing guideline-based QI can succeed either parallel to or following the guideline process with careful planning and instruction. Strategic partnerships seem key for implementation. Patient participation and relevance, measurement of qualitative aspects and piloting are areas for further development.
Trial registration number: German Clinical Trials Registry (DRKS00013006).
The Jupyter ecosystem with JupyterHub and JupyterLab as its most prominent members is the de-facto standard for teaching Python programming and also for research in machine learning and data science. Although the Jupyter project is well documented, there are lots of settings and situations requiring deep knowledge of the internal workings of Jupyter, Linux and related software tools. This report describes three problems and possible solutions arising when installing and configuring a Jupyter-based teaching environment. These three problems are the installation and setup of the autograding tool nbgrader, the interplay between JupyterHub and Linux PAM, and providing access to WebDAV resources for users of JupyterHub.
Die für die Planung des Materialflusses relevanten Fertigungsprozesse lassen sich sehr genau planen, beispielsweise über die Leistung der Maschine (Durchsatz je Zeiteinheit). Bei der Planung eines Projektes spielen logistische Prozesse, die zu den Kernprozessen eines Unternehmens gehören, eine wichtige Rolle. Jedoch werden sie meist nur grob terminiert und mit großen Puffern kalkuliert. Dies kann zu einer Verlängerung der Projektdauer führen. Für eine genauere Terminierung eines Projektes ist es daher entscheidend, die Dauer der logistischen Prozesse mindestens in dem Maße wie die Fertigungsprozesse zu ermitteln, um das Risiko einer Projektverzögerung zu minimieren.In diesem Beitrag wird deshalb eine Methode zur datenbasierten Schätzung von Prozessdauern mit dem Ziel der Wiederverwendung von Projektwissen vorgestellt, die es dem Projektmanagement ermöglichen soll, Dauern von logistischen Prozessen präziser zu schätzen als das aktuell basierend auf Erfahrungswissen erfolgt. Besonderes Augenmerk liegt dabei auf der Herleitung der Entwurfsaktivitäten. Durch die Anwendung der Methode soll das Projektmanagement von einer genaueren, datenbasierten Schätzung von (Logistik‑)Prozessdauern profitieren und so entstandenes Wissen über einen Ontologieansatz wiederverwenden können.
Im Rahmen dieser Arbeit wird ein statisch-analytisches Modell entwickelt, mit dem eine generalistische Untersuchung von Hufproblemen bei Pferden ermittelt werden kann. Dabei steht nicht die Analyse eines jeden einzelnen Equiden im Vordergrund, sondern vielmehr die typischen Gegebenheiten der territorialen Haltung und die rassebedingten Spezifika.
Zu Beginn müssen die typischen Ursachen und Faktoren ermittelt werden, die einen Einfluss auf den Huf des Pferdes haben können. Dies seien zum Beispiel typische Bodenbegebenheiten, Härte des Bodens, Feuchtigkeit, usw. Diese Ursachen werden mittels einer Ishikawa-Untersuchung ermittelt.
Weiterhin müssen analytische Methoden angeboten werden, mit denen eine entsprechende Untersuchung erfolgen kann. Dies soll aus Gründen der Untersuchbarkeit indirekt über Klebebeschläge erfolgen. Als analytische Messmethoden werden Folgende vorgeschlagen:
- geeignete geometrische/3D-Untersuchungen für „benutzte Duplos“, um hier statistische Trends zu ermitteln
- geeignete Elementanalysen (z.B. XRF), um die chemischen Beanspruchungen aus Richtung Boden und aus Richtung Huf auf das Material zu bewerten
- Beschreibung einer geeigneten Stichprobe anhand von Rasse, Region, Nutzung und Bodenbeschaffenheit in Stall und Umgebung
Das Ziel der Arbeit wird die konkrete Versuchsentwicklung sein, wie man die speziellen Bedürfnisse verschiedener Rassen auf bestimmten Untergrund (sowohl im Stall als auch im territorialen Umfeld) bestimmen kann und was darauffolgend zu beachten wäre.
Die Autoren bringen langjährige Erfahrung in verschiedenen Industriebranchen und der akademischen Ausbildung im Lean- und Project and Process Management mit sich. Im Rahmen der beruflichen Tätigkeit und der akademischen Arbeit hat sich immer wieder die Frage gestellt, wie die Philosophie des Lean Management mit den Aufgaben des Projekt Management Office interagieren können. Viele Ansätze des Lean Management, vor allem organisatorische Methoden zeigen eine breite Anwendungsmöglichkeit und sollten somit auch dem Projekt Management Office (PMO) hilfreich sein. Vor einiger Zeit hat sich schon der Begriff des Lean Office [YDF01] etabliert, der aber sowohl in der Büroorganisation als auch der Dokumentenpflege Ansatz findet. Im Rahmen des PMO soll dieser Lean Office auf die bereitzustellenden Prozesse und deren Integration ins Enterprise Ressource Planning Anwendung finden. Je schlanker und effizienter die Projekt- und Programmprozesse einer Organisation aufgestellt werden, desto leichter können diese abgebildet und in die Enterprise Ressource Planning (ERP)-Datenlandschaft übertragen werden. Somit wird ein solider Grundstein über den gesamten Produktprozess gelegt - von der Entwicklung, über die Herstellung bis hin zur schlussendlichen Verwertung schlank, effizient, automatisiert und digitalisiert abgebildet zu sein.
Après un processus accéléré de sécularisation des sociétés en Europe après la 2ème Guerre Mondiale, au début du XXIème , la place de la religion dans la société est redevenue un topique dans les débats politiques, notamment depuis que des courantes islamistes radicaux ont commencé à réaliser des actes terroristes aussi au dehors des pays majoritairement musulmans.
Même si déjà depuis la Révolution Islamique iranienne, le FN a essayé d’établir un lien entre les personnes d’origine maghrébines en France et cette courante d’islamisme politique, dans le contexte actuelle, le discours xénophobe du Front National a été complété désormais par un discours décidément islamophobe. Ce nouvel positionnement du FN ne fait pas l’exception en Europe même si la situation française est spécifique à cause de sa tradition de laïcité.
L’objective de cette article est d’analyser l’image que les trois religions abrahamites reçoivent dans les textes programmatiques les plus récents du FN et de les comparer avec ceux d’autres partis d’extrême droite populiste qui ont eu un certain succès lors des élections dans des pays de l’Union Européenne, tel que la Lega Nort en Italie, le Vlaams Belang en Belgique, La Plataforma per Catalunya en Espagne, le Dansk Folkpartiet au Danemark, le FPÖ en Autriche, le PVV au Pays-Bas, les Sverigedemokraterna en Suède et plus récemment l’Alternative für Deutschland (AfD) en Allemagne.
Est-ce qu’il y a un discours transeuropéen des extrêmes droites populistes quant à l’islam et quelle est la place du christianisme et du judaïsme ? Quelle sont les représentations de ces trois religions abrahamites ? Est-ce qu’il est possible d’écrire des spécificités pour chaque parti dû à son histoire idéologique et les spécificités des relations Etat-Eglise dans les différents pays ?
Le corpus de cette analyse est constitué par les textes programmatiques les plus récents de chaque parti rendu disponible sur son site internet, complété éventuellement par d’autres documents accessibles sur le même site. L’analyse sera faite dans le cadre de l’analyse critique du discours.
Lewis–Mogridge Points: A Nonarbitrary Method to Include Induced Traffic in Cost-Benefit Analyses
(2020)
We propose a new method to estimate benefits of road network improvements, which allows to include the induced demand without arbitrary assumptions. Instead of estimating induced demand (which is nontrivial and hardly possible in practice), we search for demand induction where initial benefits are mitigated to zero. Such approach allows to formulate a dual measure of benefit, covering both the potential benefits and the likelihood of consuming them by the induced traffic. We first estimate benefits of road network improvement assuming that traffic demand is fixed. Consequently, we find demand model configurations at which the benefits of the new investment become null, i.e., all the initial benefits are consumed by the traffic demand growth. We call such states of induced demand the Lewis–Mogridge points of the analysed improvement. We select the most probable of such points and use it to calculate the proposed novel indicator μ, for which the initial benefits (obtained under a fixed-demand assumption) are multiplied with a demand increase rate needed to consume them. We believe that such measure allows to include the critical phenomena of induced traffic and, at the same time, to overcome problems associated with reliable estimation of induced demand. As we illustrate with the case of two alternative road improvement schemes in Kraków, Poland, the proposed method allows to estimate maximal threshold of induced traffic and to select scenario more resilient to induced traffic.
Auf digitalen Märkten besteht, wer die zugrundeliegenden digitalen, unternehmensbezogenen oder akteursübergreifenden institutionellen Arrangements versteht und aktiv gestaltet. Dazu werden ausgereifte, von Forschung und Praxis diskutierte und gemeinsam weiter entwickelte Methoden zum Design digitaler Plattformen, Geschäftsmodelle und Service-Ökosysteme benötigt. Einen gemeinschaftlichen Aufschlag hierzu macht der folgende Artikel. Er entstand aus einem offenen Aufruf in der Wirtschaftsinformatik-Community – über Mailing-Listen und soziale Medien. Im Ergebnis führen sieben Forschergruppen (oder einzelne Forscher und Forscherinnen) ihre aktuellen Erkenntnisse zu diesem Thema zusammen.
Nell’esame del corpus grafico ascritto a Michelangelo Buonarroti ruolo preminente rivestono, soprattutto, i quesiti circa l’autografia dei disegni e la loro relazione con le opere d’arte (vedi l’introduzione “Michelangelo als Zeichner”). Il contributo “Michelangelo abbreviatore”, viceversa, focalizza l’attenzione sul fenomeno degli elementi grafici di sigla o cifra, cioè di abbreviazione. Questi sono, tuttavia, da distinguere rispetto ad altre tecniche grafiche di riduzione e abbreviazione come, ad esempio, l’uso di differenti gradi di elaborazione e densità grafiche all’interno di un singolo disegno, come anche dell’abbozzo di dettagli frazionati, talvolta apparentemente isolati. Tali aspetti si incontrano spesso, soprattutto a beneficio dell’economia del lavoro e del tempo, per delineare un particolare e specifico soggetto e rappresentano una peculiarità spesso descritta e ben nota del disegno michelangiolesco in generale – essendo, d’altra parte, riscontrabili non solo nell’ambito del disegno di figura, ma anche in quello di architettura.
È superfluo ricordare che tali abbreviazioni, solo rapidamente abbozzate (come nel caso di “premières pensées”), nella loro forma di rappresentazione frammentaria o fortemente ridotta, quasi stenografata, siano in grado di sviluppare e contenere un concetto artistico – per lo meno nel caso dei “veri” disegni di Michelangelo (cioè disegni autografici) realizzati comunque, per la maggior parte, per la genesi dell’opera, per così dire per scopi intrinseci, e in un certo senso come “studi” e “fogli di lavoro”. Per la maggior parte dei casi, difatti, non era previsto che terzi, ad esempio committenti e colleghi artisti, vedessero questo materiale di lavoro e le abbreviazioni e l’incompiutezza ivi contenute; queste persone, dunque, non dovevano, e neanche sarebbero state in grado, di decifrarle. In ogni caso, i collaboratori e – nel senso più ampio del termine – soprattutto gli allievi, si sarebbero potuti esercitare su questi fogli raggiungendo differenti gradi di successo e profitto.
Laddove, però, l’abbreviazione viene applicata come autentico mezzo grafico-artistico, essa indica invece un motivo determinato, non incompleto, non rivestendo neppure la mera funzione di segnaposto per elementi formali integrabili con facilità in un secondo momento. Piuttosto, la stessa è perfetta nella sua sintesi e contiene non solo un significato originario, un’espressione di grado e valore proprio, ma anche manifestazioni di penetrante e acuto umorismo. E in questi casi specifici, così sembra, l’abbreviazione autonoma si rivolge esplicitamente anche a terzi, invitandoli all’esercizio dell’osservazione e della decifrazione.
Traffic calming is introduced to minimise the negative results of motor vehicle use, for example, low safety level or quality of life, high noise and pollution. It can be implemented through the introduction of road infrastructure reducing the velocity and the traffic volume. In this paper, we studied how traffic-calming influences the traffic assignment. For the research, a traffic-calming measure of speed cushions on the Stachiewicza street in Krakow was taken. A method of extracting trajectories from aerial footage was shown, and it was used to build a model. For a given example, through driving characteristics research and microscopic modelling, volume–delay BPR functions were estimated—for a street with and without traffic calming. Later, a toy network of two roads of the same length, connecting the same origin and destination, was simulated using an equilibrium traffic assignment method. Simulations were conducted both with the use of PTV Vissim and Visum software and through individual calculations. According to the results of this paper, there was a difference in traffic volume according to the equilibrium traffic assignment in the aforementioned toy network as a function of total network traffic volume.
Multiplikatorenkonzepte zu Stress- und Emotionsregulation im Rettungsdienst – ein Scoping-Review
(2024)
Hintergrund: Beschäftigte im Rettungsdienst sind einem erhöhten Risiko ausgesetzt, psychische Beeinträchtigungen zu entwickeln, da sie in ihrem Berufsalltag hohen körperlichen und emotionalen Stressoren ausgesetzt werden. Der Umgang mit diesen Stressoren stellt eine wichtige Ressource dar, um im Sinne der Salutogenese eine Bewältigung vorzunehmen. Damit die Förderung der Stress- und Emotionsregulation nicht nur auf einer Verhaltensebene wirksam wird, bieten sich Multiplikatorenkonzepte mit einer verhältnisbezogenen Verzahnung in die Arbeitssysteme an.
Ziel der Arbeit: Die Überprüfung der verfügbaren Evidenz von Multiplikatorenkonzepten zur Stress- und Emotionsregulation im Rettungsdienst ist das Ziel des Scoping-Reviews.
Material und Methoden: Die Übersicht orientiert sich inhaltlich am Modell der Salutogenese und methodisch am Konzept des Joanna Briggs Institute zur Durchführung von Scoping-Reviews. Die Recherche basierte auf den Suchoberflächen PubMed sowie PubPsych (alle Evidenzquellen) und erstreckte sich auf deutsch- und englischsprachige Literatur im Zeitraum von 1997 bis 2023. Alle Schritte der Datensichtung und -extraktion wurden von zwei Reviewern unabhängig voneinander durchgeführt.
Ergebnisse: Für die Überprüfung der verfügbaren Evidenz wurden insgesamt 22.345 Datensätze identifiziert und gesichtet. Abschließend konnten vier Volltexte eingeschlossen werden. Die Interventionen richten sich neben Mitarbeitenden des Rettungsdiensts auch an andere Berufsgruppen. Alle Trainings sind modular aufgebaut. Die psychosozialen Widerstandsressourcen sind vielfältig. In drei von vier Studien können kleine Ergebnisse belegt werden; eine Intervention erhöht die Selbstwirksamkeit der Teilnehmenden.
Diskussion: Es gibt weltweit keine spezifischen Konzepte, die sich explizit an Mitarbeitende des Rettungsdiensts richten. Gezielte Interventionen sind aufgrund der hohen Belastungen der Berufsgruppe erforderlich.
Ziel dieses Beitrags ist der Vergleich von Formen und Diskursfunktionen der nominalen Anredeformen in verschiedenen Fernsehwahldebatten aus Brasilien, Portugal, Deutschland, Frankreich und Spanien.
Die sprachvergleichende Perspektive ist aus mehreren Gründen von besonderem Interesse. Zum einen liegt ein sprachstruktureller Unterschied zwischen dem Portugiesischen und den anderen Sprachen vor, der darin besteht, dass das Portugiesische eine große Zahl nominaler Anredeformen in sein Pronominalparadigma integrieren kann, wohingegen es diese Möglichkeit im Deutschen, Spanischen und Französischen nicht oder nur sehr begrenzt gibt.
Ein anderer Unterschied ist, dass es im Portugiesischen einen gewissen Spielraum dafür gibt, die interlokutive Distanz in der Interaktion durch Anredeformen auszuhandeln, was sich auch in den Wahldebatten zeigt. In den anderen drei Sprachen besteht diese Möglichkeit nur sehr eingeschränkt.
In allen fünf Debatten stehen die Anredeformen jedoch in engem Zusammenhang mit Fragen, wie z.B. der, wie Respekt oder Professionalität gezeigt wird, wodurch somit ein gewisser Zusammenhang zwischen der Wahl der Anredeformen und dem diskursiven Ethos manifest wird. Die Wahl der Anredeformen kann als strategisch betrachtet werden, wie auch der Wechsel von der Anrede zur delocutio in praesentia (Rede über den Gesprächspartner in seiner Gegenwart). Doch trotz dieser Parallelen zeigen sich deutliche Unterschiede in der Ausgestaltung, die die Frage nach interkulturellen Differenzen aufwerfen.
The book 'Reinforcement Learning: An Introduction' by Sutton and Barto is the standard text book for introductory courses to reinforcement learning. Next to concrete algorithms and extensive examples the book contains several fundamental results related to Markov decision processes (MDPs) and Bellman equations in Chapters 3 and 4. Unfortunately some proofs are missing, some theorems lack precise formulation, and for some results the line of arguments is quite garbled.
In this note we provide all missing proofs, give precise formulations of theorems and untangle the line of arguments. Further, we avoid using random variables and their expected values. Since we (like Sutton/Barto) restrict our attention to finite MDPs all expected values can be made explicit avoiding overloaded notation and murky conclusions.
This article bridges the gap between introductory literature like Sutton/Barto and research literature containing exact formulations and proofs of relevant results, but being less accessible to beginners due to higher generality and complexity.
Hintergrund/Zielstellung: Aufgrund des gestiegenen Informationsbedürfnisses von Patienten wird für Ärzte ein eigener Webauftritt als Informationsmittler mit dem Ziel der Patientengewinnung und -bindung zunehmend bedeutsam. In der vorliegenden Studie wurde daher die Patientenorientierung der Internetauftritte niedergelassener Fachärzte für Orthopädie und/oder Unfallchirurgie in Sachsen untersucht.
Methode/Stichprobe: Alle Websites der im Arztregister der Kassenärztlichen Vereinigung Sachsen gelisteten Fachärzte für Orthopädie und/oder Unfallchirurgie wurden mithilfe einer standardisierten Checkliste analysiert.
Ergebnisse: Von allen untersuchten Fachärzten (n = 349) besaßen 140 (40,1 %) einen eigenen Internetauftritt. In der Arztpraxis durchgeführte diagnostische Methoden und Therapiemaßnahmen wurden auf je ca. 90,0 % der Websites genannt und auf ca. der Hälfte hiervon erklärt. Der Kontrast konnte auf 10 Websites angepasst werden. Eine Meinungsäußerung wurde den Patienten auf 28 Websites ermöglicht. Rechtlich verpflichtende Impressuminhalte wurden auf 45,0 % der Internetauftritte nicht hinreichend beachtet.
Diskussion/Schlussfolgerung: Die Ergebnisse weisen darauf hin, dass die Gestaltung der Internetauftritte sowie deren Informationsgehalt differieren und Verbesserungspotenziale existieren. Ein standardisierter Kriterienkatalog könnte ein einheitliches Qualitätsniveau gewährleisten und von den Ärzten als Handlungsempfehlung genutzt werden.
Recent surveys and political research have shown that the acceptance of the political programmes of populist parties, such as the “Alternative für Deutschland (AfD)”, is relatively high amongst the population of the three eastern German federal states, especially in Saxony, where the AfD won nine of the 13 rural districts during the local elections in May 2019. Thus, it seems relevant to take a closer look at the persuasive discourse of a so-called populist party. In its public discourse, the AfD responds to the fears and concerns of those people who tend to use social media platforms to gain information when making political decisions. The aim of the article is to show which verbal and visual resources characterize the persuasive discourse of the AFD Saxony on their Facebook account. For this purpose, we propose a qualitative, multimodal analysis of selected entries which the party uploaded on its Facebook account between November 2018 and March 2019.
The demand for thorough disinfection within ambulances is essential, given the in-vehicle medical procedures and the potential high risk of infections due to patients' open wounds. One solution that can address this hygiene challenge involves the application of reactive products generated from atmospheric (air) oxygen and water vapor, activated through the use of cold plasma. Cold plasma's charged particles perforate the cell membranes of microorganisms. This process does not work in human cells, as proteins in the form of enzymes within the body break down the cold plasma and protect the cells. The study was done on an ambulance that was contaminated in eight places. Samples were taken from each site, and two surfaces measuring approximately 8 × 8 cm were carefully sealed and marked. These surfaces were deliberately contaminated by applying an Enterococcus faecium suspension of 8.5 × 107 CFU/mL using a sterile cotton swab. It was followed by the disinfection procedure, that was initiated with the PLASMOCAR device. It was positioned on the front workspace and operated for a duration of 30 min, utilizing the vehicle's onboard voltage. Throughout the operation, all doors and windows were closed and the vehicle's air conditioning system remained active. After the completion of the disinfection process, samples were collected from the surfaces for bacterial counts. A reduction of 3.73 log levels in initial bacteria was accomplished within the rescue vehicle for Enterococcus faecium, equivalent to a 10–fourfold reduction in bacteria, eliminating up to 99.99% of the initial microorganisms. This success makes the process well-suited and convenient as an ongoing "background" procedure to enhance the established disinfection procedures. The established disinfection procedures outlined in the hygiene plan must be promptly implemented whenever mechanical surface cleaning is required. The use of PLASMOCAR offers an extra layer of protection and security, significantly decreasing the risk of microorganism transmission through cross-contamination and aerosols. This is a significant benefit for the well-being of both staff and patients.
In diesem Band finden sich das Programm, die Sektionsbeschreibungen und die Abstracts der Vorträge des 15. Deutschen Lusitanistentages, der in der Zeit vom 19.09.-23.09.2023 an der Westsächsischen Hochschule Zwickau stattgefunden hat.
The research was carried out for the selection of optimal options for the heat supply of multi-apartment buildings, taking as an example several new buildings in Yerevan. The purpose of the study is to confirm the choice of the best method of providing heat in apartment complexes. It was used to calculate and analyze the energy-economic and operational-technical indicators of individual heating boilers, small centralized systems, and hybrid systems to solve this problem. The calculations considered both natural gas tariffs and fluctuations in the value of the Armenian dram against the US dollar. The value of 1 kWh of thermal energy or specific heat capacity has been determined as an important criterion for choosing the most efficient method of heat supply, considering the careful analysis of almost all variable factors.
Ziel dieses Beitrags ist die Analyse der folgenden Fragen an das Wahlprogramm Bolsonaros für die brasilianischen Präsidentschaftswahlen 2018: Was sind die Folgen bezüglich des Inhalts und des Ethos des Kandidaten dessen, dass sein Wahlprogramm in Form einer Power Point-Präsentation publiziert wird? Welche Funktion haben die religiösen Textteile für das Ethos des Kandidaten? Welche explizite und implizite Hierarchie der sittlichen Güter und Werte lässt sich aus diesem Programm rekonstruieren? Unter anderem wird die Kohärenz zwischen der Hierarchie der sittlichen Güter, die Privateigentum und nicht das menschliche Leben als höchstes sittliches Gut betrachtet, und der während seiner Regierung verfolgten Nekroplitik aufgewiesen
Hintergrund: Die Studienzeit ist eine Phase, in der die jungen Erwachsenen mit spezifischen Anforderungen konfrontiert werden. Studierende der Medizin gelten als besonders psychisch belastet. Untersuchungen, in denen sie diesbezüglich mit Studienfächern der gleichen Branche verglichen werden, sind jedoch rar.
Fragestellung: Ziel der Untersuchung war es, die psychische Gesundheit von Medizinstudierenden sowie von Gesundheits- und Pflegemanagementstudierenden zu untersuchen und zu vergleichen.
Material und Methoden: Untersucht wurden Studierende der Studiengänge Gesundheits- sowie Pflegemanagement (WHZ) und Medizinstudierende der (TU Dresden). Verschiedene Aspekte psychischer Gesundheit wurden mithilfe eines Online-Fragebogens erhoben. Dieser beinhaltete die Instrumente zur Erfassung der Prüfungsängstlichkeit (TAI-G-Kurzskala) und psychischen Belastung (BSI-18), sowie ein Item zur Ermittlung der subjektiv wahrgenommenen Studienbelastung. 258 Studierende nahmen an der Befragung teil.
Ergebnisse: Es konnten keine signifikanten Unterschiede hinsichtlich des Gesamtscores der Prüfungsängstlichkeit und der psychischen Belastung zwischen den Studierenden beider Studienfächer festgestellt werden. Dahingegen gaben Medizinstudierende an, dass sie im Vergleich zu Studierenden der anderen beiden Studienfächer eine signifikant höhere Studienbelastung wahrnehmen.
Schlussfolgerung: Die ermittelten Gesamtscores lagen teilweise über den Werten in vergleichbaren Studien. Die Studierenden sollten bereits präventiv unterstützt werden, um eigene Bewältigungsstrategien zu entwickeln. Nicht nur die Bereitstellung von Hilfen ist notwendig, sondern vielmehr das aktive Eingreifen mithilfe von gesundheitsfördernden Maßnahmen durch die Institution Hochschule, in die die Studierenden frühzeitig integriert werden sollten.
The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.
Prussian blue (PB) layers were electrodeposited for the fabrication of Au/PB/Ag stacks to study the resistive switching effect. The PB layers were characterized by different techniques to prove the homogeneity, composition, and structure. Electrical measurements confirmed the bipolar switching behavior with at least 3 orders of magnitude in current and the effect persisting for the 200 cycles tested. The low resistance state follows the ohmic conduction with an activation energy of 0.2 eV.
Im Zuge der europäischen Wirtschaftskrise kam es seit dem Jahr 2008 zu einem Anstieg arbeitsbedingter Migrationsbewegungen aus südeuropäischen Ländern in ökonomisch stabilere Staaten, wie zum Beispiel Deutschland.
In der Bundesrepublik herrscht dahingegen ein durch den demografischen Wandel verursachter Mangel an qualifizierten Arbeitskräften. Die gezielte Anwerbung gut ausgebildeter Arbeitskräfte aus dem Ausland ist eine der Maßnahmen gegen diesen Fachkräftemangel. Insbesondere im Gesundheitssektor werden im Rahmen sogenannter „Fachkräfteinitiativen“ ausländische Mitarbeiter angeworben.
Der Fokus der vorliegenden Forschungsarbeit liegt auf der Anwerbung spanischer Fachkräfte nach Deutschland. Anhand von qualitativen Interviews mit spanischen Krankenschwestern werden der Recruitingprozess und der spätere Arbeitsalltag genauer untersucht. Hierbei zeigt sich, dass die Erwartungen dieser jungen Menschen an ihr Leben in Deutschland oftmals unerfüllt bleiben.
In diesem Artikel wird eine allgemeine Analyse der Stakeholder einer digitalen Produktion bearbeitet. Dabei kommt das Ishikawa-Diagramm für die Analyse zum Einsatz und wird erarbeitet. Über eine Betrachtung des Shopfloors bis hin zu den einzelnen Maschinen wird über den Einsatz von Betrachtungsmethoden des Lean Management die Analyse durchgeführt und ein möglichst umfangreiches Anforderungsbild für die Digitalisierung einer Produktion erarbeitet.
Die Seminararbeit untersucht die Bedeutung der strategischen Personalentwicklung und Kompetenzförderung im spezialisierten Bereich des Sondermaschinenbaus, mit einem Fokus auf die Praxis der Skill-Checks in einem deutschen Unternehmen. Sie beleuchtet die Auswirkungen des demografischen Wandels, der rasanten technologischen Entwicklungen und der Globalisierung auf den Bedarf an Fachkräften mit spezifischen technischen und sprachlichen Kompetenzen. Durch eine detaillierte Analyse der bestehenden Ausbildungs- und Weiterbildungsprozesse werden Schwachstellen aufgezeigt. Die Arbeit schlägt Lösungsansätze vor, wie durch strukturierte Weiterbildungsprogramme und verbesserte Auswahlverfahren diesen Herausforderungen effektiv begegnet werden kann, um die Wettbewerbsfähigkeit zu stärken.
Sodium iron hexacyanoferrate (NaFeHCF) films were electrodeposited on Au/Cr/Si for the study of growth behavior and physical properties. The NaFeHCF films were studied by different analytical methods to prove the chemical composition, morphology and crystal structure. The grains of the film grow with a cubic structure with an average lattice parameter of 10.10 Å and the preferential growth direction along the [111] direction of the cubic cell. The films show a repeatable bipolar resistive switching behavior accompanied by high current changes (up to a factor of ~105). The different resistive states in the materials are dominated by ohmic conduction.
The electrical conduction mechanism of resistive switching Prussian white (PW) thin films obtained by the electrodeposition method was examined by AC impedance spectroscopy and DC current–voltage measurements. Using an electrode tip to contact PW grown over Au, robust unipolar resistive switching was observed with a current change of up to three orders of magnitude, high repeatability, and reproducibility. Moreover, electrical impedance spectroscopy showed that the resistive switching comes from small conductive filaments formed by potassium ions before the establishment of larger conductive channels. Both voltammetry and EIS measurements suggest that the electrical properties and conductive filament formation are influenced by defects and ions present in the grain boundaries. Thus, PW is a potential material for the next generation of ReRAM devices.
This article aims to identify the status quo of sustainability covenants firstly, secondly analyze their possibilities in enhancing sustainability performance and thirdly present further research directions. Covenants are additional contractual agreements mainly used in financial contracts, e.g. loans. They often focus on financial performance indicators, e.g., equity and net debt ratio, which the borrower must fulfil. However, the purpose of this article is to present a new approach to non-financial covenants, so-called sustainability covenants. Therefore, also nowadays ecological and social challenges are addressed. Banks have a huge impact on sustainable development by introducing more non-financial indicators in evaluating the creditability of borrowers. As a key hypothesis, this article argues that the approach of integrating ecological and social objectives through non-financial covenants is underrepresented in economic and business practice. Therefore, this article wants to examine how those objectives can be integrated into the financial concept of covenants and rely on research towards an integrative sustainability approach. In addition, a systematic literature review was conducted from October 2022 to July 2023 to analyze the status quo and derive future research directions. The review was based on two databases – Google Scholar and Scopus. As one key result, it was revealed that there is scarce existing literature on sustainability covenants, which refers to them as a policy measure. Only a few publications analyze their usage in financial contracts. However, this study implies the necessity for further research on sustainability covenants, emphasizing that they are powerful indicators to enhance the sustainability performance of the borrower.
Background: Stroke is one of the most frequent causes of death in Germany and the developed countries. After a stroke, those affected often suffer particularly from functional motor restrictions of the upper extremities. Newer techniques such as the BCI-FES systems aim to establish a communication channel between the brain and external devices with a neuromuscular intervention. The electrical activity of the brain is measured, processed, translated into control signals and can then be used to control an application.
Methods: As a mixed-methods design (exploratory design), eight guideline-based expert interviews were conducted first. For the quantitative expert survey, 95 chief physicians from the field of neuromedicine in rehabilitation facilities nationwide were subsequently invited to participate in an online survey.
Results: In our data analysis, we found that doctors are largely open-minded towards new technical rehabilitation systems. In addition to the proper functioning of the system, they consider the understanding of the functionality and the meaningfulness of the system to be particularly important. In addition, the system should be motivating for individuals, generate meaningful movements, be easy to use, evidence-based and quick to set up. Concerns were expressed regarding the understanding of the system’s processes, especially in the acute phase after a stroke, as well as the excessive expectation of results from the system on the part of the persons. The experts named stroke patients in rehabilitation phase C, which is about mobilization and recovery, as well as all persons who can understand the language requirements as benefiting groups of people.
Conclusion: The present study shows that more research should and must be done in the field of BCI-FES interfaces, and various development trends have been identified. The system has the potential to play a leading role in the rehabilitation of stroke patients in the future. Nevertheless, more work should be done on the improvement and implementation as well as the system’s susceptibility to interference in everyday patient life.
Background: Proctoring represents a cornerstone in the acquisition of state‐of‐the‐art cardiovascular interventions. Yet, travel restrictions and containment measures during the COVID‐19 pandemic limited on‐site proctoring for training and expert support in interventional cardiology.
Methods and Results: We established a teleproctoring setup for training in a novel patent foramen ovale closure device system (NobleStitch EL, HeartStitch Inc, Fountain Valley, CA) at our institution using web‐based real‐time bidirectional audiovisual communication. A total of 6 patients with prior paradoxical embolic stroke and a right‐to‐left shunt of grade 2 or 3 were treated under remote proctorship after 3 cases were performed successfully under on‐site proctorship. No major device/procedure‐related adverse events occurred, and none of the patients had a residual right‐to‐left shunt of grade 1 or higher after the procedure. Additionally, we sought to provide an overview of current evidence available for teleproctoring in interventional cardiology. Literature review was performed identifying 6 previous reports on teleproctoring for cardiovascular interventions, most of which were related to the current COVID‐19 pandemic. In all reports, teleproctoring was carried out in similar settings with comparable setups; no major adverse events were reported.
Conclusions: Teleproctoring may represent a feasible and safe tool for location‐independent and cost‐effective training in a novel patent foramen ovale closure device system. Future prospective trials comparing teleproctoring with traditional on‐site proctoring are warranted.
The purpose of this study is to examine the relationship between contextual work-related factors in terms of job demands (workload-WL) and job resources (work flexibility-WF), work-life conflict (WLC) and the burnout dimension emotional exhaustion (EE) in a large population-based sample. Building on the job demands resources model (JDRM), we have developed the hypothesis that WL has an indirect effect on EE that is mediated by WLC. We conducted a secondary analysis using data from the Dresden Burnout Study (DBS, N = 4246, mean age (SD) = 42.7 years (10.5); 36.4% male). Results from structural equation modelling revealed that EE is positively associated with WL (β = 0.15, p = 0.001) and negatively associated with WF (β = -0.13, p = 0.001), also after accounting for potential confounding variables (demography, depressive symptoms, and lifetime diagnosis of burnout). Both effects are mediated by WLC (β = 0.18; p = 0.001 and β = 0.08; p = 0.001, respectively) highlighting the important role of WLC in employee health. In summary, WF may help to reduce burnout symptoms in employees, whereas WL may increase them. Study results suggest that both associations depend on WLC levels.
En 1985 inició el Ministerio de Educación en Venezuela el Modelo de Atención Integral al Niño Sordo, un cambio de la práctica oralista a un modelo bilingüe en las escuelas de sordos. Eso implicaba eliminar la enseñanza del español hablado como objetivo principal e introducir la Lengua de Señas Venezolana (LSV) a las escuelas. Se desencadenó así un intenso período de cambios que marcó indeleblemente a la comunidad sorda. Aquí se aborda el Modelo desde la perspectiva de la planeación lingüística, describiendo sus objetivos y sus efectos sobre la adquisición, la estructura (el corpus) y el estatus de la LSV: La LSV y el español señado fueron reubicados en la diglosia existente hasta entonces; surgió una variante académica de la LSV y aumentó el número de usuarios de la LSV. El estudio se basó en el análisis cualitativo de entrevistas realizadas a cinco testigos de aquel proceso.
Context: VR as an application to enhance well-being is sparsely researched in the elderly population. The aim of the pilot study was to analyze the effect of 360° videos of different categories on the state of mind of seniors in nursing facilities. Furthermore, for the implementation in everyday life, the usability of the system and the experience for seniors should be evaluated.
Methods: The VR experience was used as a supplement to existing care services in three facilities on eight subjects. Mood state was assessed using the Questionnaire for the Assessment of Happiness before and after the intervention. Demographic data and technology acceptance were collected beforehand. After the intervention, subjects were interviewed about confounding factors and side effects, and nursing home staff were interviewed about the usability of the system and the organizational concept of implementation.
Results: There was a positive effect on state of mind. Gender and spatial mobility turned out to be influencing factors. Categories containing people, animals and action achieved the highest increases in the state of mind. Interest in using technical devices correlated negatively with the change in mood state. None of the subjects found the VR goggles distracting or reported motion sickness. Very good usability was indicated by the employees.
Conclusion: A very high willingness to use this technology was found among nursing staff and residents. The tendencies of the positive effect of 360° videos on the state of mind, as well as differentiation based on the mentioned characteristics gender and spatial mobility, should be verified by a larger sample to empirically validate the use of this technology to increase the quality of life.
This paper embeds the early political economy of Friedrich August von Hayek in the intellectual milieu of German ordoliberalism. The urgency during the 1930s and 1940s to stabilize the disintegrating societal orders is identified as a crucial driver behind the parallelisms between Hayek and the ordoliberals. Their shared theoretical position is that in such moments, liberty can thrive sustainably only after a framework of general and stable rules has been established. Hayek’s proximity to ordoliberalism was most explicitly discernible in The Road to Serfdom and at the founding meeting of the Mont Pèlerin Society in 1947, culminating in the shared politico-economic vision of the competitive order. The contextual nature of Hayek’s ordoliberalism surfaced in the years after The Constitution of Liberty when his focus shifted, along with the postwar intellectual and institutional stabilization of the West: from how stable orders enable liberty, to how liberty enables the evolution of orders.
In diesem Artikel sollen einige Aspekte des nachhaltigen Reportings im Sinne der EU-Richtlinien betrachtet werden. Inhaltlich wird die nachhaltige Unternehmensführung unter den Gesichtspunkten der Beschreibung und dem Einfluss der Neuregelung der Transparenzrichtlinien und Offenlegungspflichten auf die Unternehmen fokussiert. Weiterhin wird ein überblicksartiger Einblick in dafür notwendige nachhaltige unternehmerische Prozesse und deren Standards aufgezeigt. Abschließend wird dessen Bezug im Sinne des Reportings sowie eine kritische Bewertung betrachtet.