open_access
Refine
Document Type
- Article (32)
- Book (13)
- Part of a Book (6)
- Working Paper (5)
- Report (3)
- Other (1)
Institute
Language
- English (35)
- German (21)
- French (1)
- Multiple languages (1)
- Portuguese (1)
- Spanish (1)
Is part of the Bibliography
- yes (60) (remove)
The atomizing gas dynamics and the applied process energy have a significant influence on the produced particles. The melting process of the two wires can be influenced by current modulation. As for arc welding processes, more and more electronic and software-controlled machines are being used for arc spraying and will have replaced conventional power sources in the future. Due to the highly dynamic, fast regulating computing technology in the latest energy source, technology arcs can be operated with different current forms and types. The modern machines allow process-stable, reproducible variation of the particles and heat input into the substrate. Constant and pulsed current can be used as current forms. Usable current types are direct current (DC) and alternating current (AC). The electrical parameters must be analyzed to evaluate the process behavior. The consumable used is a wire-shaped iron-based alloy with a diameter of 1.6 mm. Relevant process parameters such as basic current Iground, pulse current Ipulse, pulse duration tpulse, impulse frequency fpulse, and alternating current frequency, fAC, are varied and recorded using appropriate measurement technology. The aim is to change the process performance and thereby the particle formation in a broad band. High-speed images are used to observe the arc and the deposition process. In addition, particle sizes are determined.
The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.
Abstract
This article presents a cost-effective ultraviolet-ozone cleaner (UV/O3 Cleaner) for surface pre-treatment of substrates in the field of semiconductor technology. The cleaner consists of two chambers, the upper one contains the electronics, including the time counter. The lower chamber contains the two UV sterilisation lamps and a UV reflector of anodized aluminium, which confines the area of high Ozone concentration in the area of interest. The device is successfully used for surface cleaning and modification of different materials. To this end, the two important wavelengths 253.7 nm (excitation of organic residues) and 184.9 nm (production of ozone from the atmospheric environment as a strong oxidant) were first detected. The effectiveness of UV/O3 cleaning is demonstrated by improving the properties of indium tin oxide (ITO) for OLED fabrication. The contact angle of water to ITO could be reduced from 90° to 3° and for diiodomethane, it was reduced from 55° to 31° within the 10 min of irradiation. This greatly improved wettability for polar and non-polar liquids can increase the flexibility in further process control. In addition, an improvement in wettability is characterized by measuring the contact angles for titanium dioxide (TiO2) and polydimethylsiloxane (PDMS). The contact angle of water to TiO2 decreased from 70° to 10°, and that of diiodomethane to TiO2 from 54° to 31°. The wettability of PDMS was also greatly increased. Here, the contact angle of water was reduced from 109° to 24° and the contact angle to diiodomethane from 89° to 49°.
Article Highlights
We report a cost-effective dry-cleaning device for surface cleaning and modification based on ultraviolet-ozone irradiation.
Contact angle measurements show an increase of wettability for different materials due to surface modification.
The UVO3 pre-treatment improves layer formation and optoelectrical properties of OLEDs.
Development and Characterization of a Dispersion-Encoded Method for Low-Coherence Interferometry
(2022)
This Open Access book discusses an extension to low-coherence interferometry by dispersion-encoding. The approach is theoretically designed and implemented for applications such as surface profilometry, polymeric cross-linking estimation and the determination of thin-film layer thicknesses. During a characterization, it was shown that an axial measurement range of 79.91 µm with an axial resolution of 0.1 nm is achievable. Simultaneously, profiles of up to 1.5 mm in length were obtained in a scan-free manner. This marked a significant improvement in relation to the state-of-the-art in terms of dynamic range. Also, the axial and lateral measurement range were decoupled partially while functional parameters such as surface roughness were estimated. The characterization of the degree of polymeric cross-linking was performed as a function of the refractive index. It was acquired in a spatially-resolved manner with a resolution of 3.36 x 10-5. This was achieved by the development of a novel mathematical analysis approach.
Experimental tests on the type-approval of motor vehicles with regard to safety belt anchorages, ISOFIX anchorages and ISOFIX top anchorages have been carried out in accordance with Regulation No. 14 UNECE. From the design stage, the safety belt anchorages must comply with the requirements for the installation of a safety belt and reduce slipping and damage to the belt while wearing it. These can be components of the seat structure or of the body's resistance structure, which have the role of fastening the seat belts. The position of the anchor points is determined by the R point. The R point is defined as the seat reference point on the seat. This point is set by the vehicle manufacturer for each seat in the vehicle. In this paper, two models of chairs were tested. Both seat models are equipped with seat belts anchored at three anchor points. Seat belt anchorages were tested simultaneously using parallel force devices. These traction devices are placed on the seat cushion and are pressed into the seat back. The pulling device has a vertical pulling arm, which has the role of anchoring the steel wire cables. Two test forces are applied simultaneously to the anchor points during the test.
This study aimed to investigate the component structural behaviour and response under overturned truck crash that subsequently collides with road-side pole or tree. The safety of the truck occupants in an accident is very important and should be considered in the process of cabin design. Specific focus will be on the structural integrity of the truck cabin in response to a collision with a cylindrical pendulum. In the past, dynamic analysis was done by real world testing. Nowadays crash simulation is proven to be much more efficient by being a virtual representation of destructive crash impact and providing opportunities to reduce the number of physical prototypes consumed for design verification, thus reducing development time. According to cab strength tests (ECE R29), the cabin body of the truck shall be attached to the chassis in such a way that in the event of impact it ensures a sufficient survival space and eliminates the risk of injury. This paper investigates the FE (finite element) simulation of a frontal impact on the cabin structure to validate the cabin according to the ECE regulation 29 tests. The study also includes the assessment of the energy absorption capabilities of the cabin during the pendulum impact. The pendulum impact was carried out using Ansys LS-Dyna explicit solver to evaluate the cabin strength under the loads.
Die Seminararbeit untersucht die Bedeutung der strategischen Personalentwicklung und Kompetenzförderung im spezialisierten Bereich des Sondermaschinenbaus, mit einem Fokus auf die Praxis der Skill-Checks in einem deutschen Unternehmen. Sie beleuchtet die Auswirkungen des demografischen Wandels, der rasanten technologischen Entwicklungen und der Globalisierung auf den Bedarf an Fachkräften mit spezifischen technischen und sprachlichen Kompetenzen. Durch eine detaillierte Analyse der bestehenden Ausbildungs- und Weiterbildungsprozesse werden Schwachstellen aufgezeigt. Die Arbeit schlägt Lösungsansätze vor, wie durch strukturierte Weiterbildungsprogramme und verbesserte Auswahlverfahren diesen Herausforderungen effektiv begegnet werden kann, um die Wettbewerbsfähigkeit zu stärken.
Recent surveys and political research have shown that the acceptance of the political programmes of populist parties, such as the “Alternative für Deutschland (AfD)”, is relatively high amongst the population of the three eastern German federal states, especially in Saxony, where the AfD won nine of the 13 rural districts during the local elections in May 2019. Thus, it seems relevant to take a closer look at the persuasive discourse of a so-called populist party. In its public discourse, the AfD responds to the fears and concerns of those people who tend to use social media platforms to gain information when making political decisions. The aim of the article is to show which verbal and visual resources characterize the persuasive discourse of the AFD Saxony on their Facebook account. For this purpose, we propose a qualitative, multimodal analysis of selected entries which the party uploaded on its Facebook account between November 2018 and March 2019.
Nell’esame del corpus grafico ascritto a Michelangelo Buonarroti ruolo preminente rivestono, soprattutto, i quesiti circa l’autografia dei disegni e la loro relazione con le opere d’arte (vedi l’introduzione “Michelangelo als Zeichner”). Il contributo “Michelangelo abbreviatore”, viceversa, focalizza l’attenzione sul fenomeno degli elementi grafici di sigla o cifra, cioè di abbreviazione. Questi sono, tuttavia, da distinguere rispetto ad altre tecniche grafiche di riduzione e abbreviazione come, ad esempio, l’uso di differenti gradi di elaborazione e densità grafiche all’interno di un singolo disegno, come anche dell’abbozzo di dettagli frazionati, talvolta apparentemente isolati. Tali aspetti si incontrano spesso, soprattutto a beneficio dell’economia del lavoro e del tempo, per delineare un particolare e specifico soggetto e rappresentano una peculiarità spesso descritta e ben nota del disegno michelangiolesco in generale – essendo, d’altra parte, riscontrabili non solo nell’ambito del disegno di figura, ma anche in quello di architettura.
È superfluo ricordare che tali abbreviazioni, solo rapidamente abbozzate (come nel caso di “premières pensées”), nella loro forma di rappresentazione frammentaria o fortemente ridotta, quasi stenografata, siano in grado di sviluppare e contenere un concetto artistico – per lo meno nel caso dei “veri” disegni di Michelangelo (cioè disegni autografici) realizzati comunque, per la maggior parte, per la genesi dell’opera, per così dire per scopi intrinseci, e in un certo senso come “studi” e “fogli di lavoro”. Per la maggior parte dei casi, difatti, non era previsto che terzi, ad esempio committenti e colleghi artisti, vedessero questo materiale di lavoro e le abbreviazioni e l’incompiutezza ivi contenute; queste persone, dunque, non dovevano, e neanche sarebbero state in grado, di decifrarle. In ogni caso, i collaboratori e – nel senso più ampio del termine – soprattutto gli allievi, si sarebbero potuti esercitare su questi fogli raggiungendo differenti gradi di successo e profitto.
Laddove, però, l’abbreviazione viene applicata come autentico mezzo grafico-artistico, essa indica invece un motivo determinato, non incompleto, non rivestendo neppure la mera funzione di segnaposto per elementi formali integrabili con facilità in un secondo momento. Piuttosto, la stessa è perfetta nella sua sintesi e contiene non solo un significato originario, un’espressione di grado e valore proprio, ma anche manifestazioni di penetrante e acuto umorismo. E in questi casi specifici, così sembra, l’abbreviazione autonoma si rivolge esplicitamente anche a terzi, invitandoli all’esercizio dell’osservazione e della decifrazione.
Sodium iron hexacyanoferrate (NaFeHCF) films were electrodeposited on Au/Cr/Si for the study of growth behavior and physical properties. The NaFeHCF films were studied by different analytical methods to prove the chemical composition, morphology and crystal structure. The grains of the film grow with a cubic structure with an average lattice parameter of 10.10 Å and the preferential growth direction along the [111] direction of the cubic cell. The films show a repeatable bipolar resistive switching behavior accompanied by high current changes (up to a factor of ~105). The different resistive states in the materials are dominated by ohmic conduction.
Traffic calming is introduced to minimise the negative results of motor vehicle use, for example, low safety level or quality of life, high noise and pollution. It can be implemented through the introduction of road infrastructure reducing the velocity and the traffic volume. In this paper, we studied how traffic-calming influences the traffic assignment. For the research, a traffic-calming measure of speed cushions on the Stachiewicza street in Krakow was taken. A method of extracting trajectories from aerial footage was shown, and it was used to build a model. For a given example, through driving characteristics research and microscopic modelling, volume–delay BPR functions were estimated—for a street with and without traffic calming. Later, a toy network of two roads of the same length, connecting the same origin and destination, was simulated using an equilibrium traffic assignment method. Simulations were conducted both with the use of PTV Vissim and Visum software and through individual calculations. According to the results of this paper, there was a difference in traffic volume according to the equilibrium traffic assignment in the aforementioned toy network as a function of total network traffic volume.
En 1985 inició el Ministerio de Educación en Venezuela el Modelo de Atención Integral al Niño Sordo, un cambio de la práctica oralista a un modelo bilingüe en las escuelas de sordos. Eso implicaba eliminar la enseñanza del español hablado como objetivo principal e introducir la Lengua de Señas Venezolana (LSV) a las escuelas. Se desencadenó así un intenso período de cambios que marcó indeleblemente a la comunidad sorda. Aquí se aborda el Modelo desde la perspectiva de la planeación lingüística, describiendo sus objetivos y sus efectos sobre la adquisición, la estructura (el corpus) y el estatus de la LSV: La LSV y el español señado fueron reubicados en la diglosia existente hasta entonces; surgió una variante académica de la LSV y aumentó el número de usuarios de la LSV. El estudio se basó en el análisis cualitativo de entrevistas realizadas a cinco testigos de aquel proceso.