open_access
Refine
Document Type
- Article (32)
- Book (13)
- Part of a Book (6)
- Working Paper (5)
- Report (3)
- Other (1)
Institute
Language
- English (35)
- German (21)
- French (1)
- Multiple languages (1)
- Portuguese (1)
- Spanish (1)
Is part of the Bibliography
- yes (60)
Nell’esame del corpus grafico ascritto a Michelangelo Buonarroti ruolo preminente rivestono, soprattutto, i quesiti circa l’autografia dei disegni e la loro relazione con le opere d’arte (vedi l’introduzione “Michelangelo als Zeichner”). Il contributo “Michelangelo abbreviatore”, viceversa, focalizza l’attenzione sul fenomeno degli elementi grafici di sigla o cifra, cioè di abbreviazione. Questi sono, tuttavia, da distinguere rispetto ad altre tecniche grafiche di riduzione e abbreviazione come, ad esempio, l’uso di differenti gradi di elaborazione e densità grafiche all’interno di un singolo disegno, come anche dell’abbozzo di dettagli frazionati, talvolta apparentemente isolati. Tali aspetti si incontrano spesso, soprattutto a beneficio dell’economia del lavoro e del tempo, per delineare un particolare e specifico soggetto e rappresentano una peculiarità spesso descritta e ben nota del disegno michelangiolesco in generale – essendo, d’altra parte, riscontrabili non solo nell’ambito del disegno di figura, ma anche in quello di architettura.
È superfluo ricordare che tali abbreviazioni, solo rapidamente abbozzate (come nel caso di “premières pensées”), nella loro forma di rappresentazione frammentaria o fortemente ridotta, quasi stenografata, siano in grado di sviluppare e contenere un concetto artistico – per lo meno nel caso dei “veri” disegni di Michelangelo (cioè disegni autografici) realizzati comunque, per la maggior parte, per la genesi dell’opera, per così dire per scopi intrinseci, e in un certo senso come “studi” e “fogli di lavoro”. Per la maggior parte dei casi, difatti, non era previsto che terzi, ad esempio committenti e colleghi artisti, vedessero questo materiale di lavoro e le abbreviazioni e l’incompiutezza ivi contenute; queste persone, dunque, non dovevano, e neanche sarebbero state in grado, di decifrarle. In ogni caso, i collaboratori e – nel senso più ampio del termine – soprattutto gli allievi, si sarebbero potuti esercitare su questi fogli raggiungendo differenti gradi di successo e profitto.
Laddove, però, l’abbreviazione viene applicata come autentico mezzo grafico-artistico, essa indica invece un motivo determinato, non incompleto, non rivestendo neppure la mera funzione di segnaposto per elementi formali integrabili con facilità in un secondo momento. Piuttosto, la stessa è perfetta nella sua sintesi e contiene non solo un significato originario, un’espressione di grado e valore proprio, ma anche manifestazioni di penetrante e acuto umorismo. E in questi casi specifici, così sembra, l’abbreviazione autonoma si rivolge esplicitamente anche a terzi, invitandoli all’esercizio dell’osservazione e della decifrazione.
Innerhalb der vorliegenden Untersuchung werden die interkulturellen Beobachtungen, die deutsche Studierende beim Praktikum in spanischen Unternehmen machen, analysiert. Im ersten Teil geht es um die Art und Weise, wie deutsche Studierende ihren Praktikumsplatz suchen und im zweiten Teil um die Analyse der interkulturellen Erfahrungen, v. a. der Konfliktsituationen, im Unternehmen. Der dritte und letzte Teil befasst sich mit der Frage, inwiefern die vorhergehende interkulturelle Vorbereitung den Studierenden im interkulturellen Alltag von Nutzen erscheint. Für die Untersuchung wurden die Praktikumsberichte über die persönlichen Erlebnisse im spanischen Ausland gemäß der Methode der qualitativen Inhaltsanalyse eingehend analysiert.
Im Zuge der europäischen Wirtschaftskrise kam es seit dem Jahr 2008 zu einem Anstieg arbeitsbedingter Migrationsbewegungen aus südeuropäischen Ländern in ökonomisch stabilere Staaten, wie zum Beispiel Deutschland.
In der Bundesrepublik herrscht dahingegen ein durch den demografischen Wandel verursachter Mangel an qualifizierten Arbeitskräften. Die gezielte Anwerbung gut ausgebildeter Arbeitskräfte aus dem Ausland ist eine der Maßnahmen gegen diesen Fachkräftemangel. Insbesondere im Gesundheitssektor werden im Rahmen sogenannter „Fachkräfteinitiativen“ ausländische Mitarbeiter angeworben.
Der Fokus der vorliegenden Forschungsarbeit liegt auf der Anwerbung spanischer Fachkräfte nach Deutschland. Anhand von qualitativen Interviews mit spanischen Krankenschwestern werden der Recruitingprozess und der spätere Arbeitsalltag genauer untersucht. Hierbei zeigt sich, dass die Erwartungen dieser jungen Menschen an ihr Leben in Deutschland oftmals unerfüllt bleiben.
Ziel dieses Beitrags ist der Vergleich von Formen und Diskursfunktionen der nominalen Anredeformen in verschiedenen Fernsehwahldebatten aus Brasilien, Portugal, Deutschland, Frankreich und Spanien.
Die sprachvergleichende Perspektive ist aus mehreren Gründen von besonderem Interesse. Zum einen liegt ein sprachstruktureller Unterschied zwischen dem Portugiesischen und den anderen Sprachen vor, der darin besteht, dass das Portugiesische eine große Zahl nominaler Anredeformen in sein Pronominalparadigma integrieren kann, wohingegen es diese Möglichkeit im Deutschen, Spanischen und Französischen nicht oder nur sehr begrenzt gibt.
Ein anderer Unterschied ist, dass es im Portugiesischen einen gewissen Spielraum dafür gibt, die interlokutive Distanz in der Interaktion durch Anredeformen auszuhandeln, was sich auch in den Wahldebatten zeigt. In den anderen drei Sprachen besteht diese Möglichkeit nur sehr eingeschränkt.
In allen fünf Debatten stehen die Anredeformen jedoch in engem Zusammenhang mit Fragen, wie z.B. der, wie Respekt oder Professionalität gezeigt wird, wodurch somit ein gewisser Zusammenhang zwischen der Wahl der Anredeformen und dem diskursiven Ethos manifest wird. Die Wahl der Anredeformen kann als strategisch betrachtet werden, wie auch der Wechsel von der Anrede zur delocutio in praesentia (Rede über den Gesprächspartner in seiner Gegenwart). Doch trotz dieser Parallelen zeigen sich deutliche Unterschiede in der Ausgestaltung, die die Frage nach interkulturellen Differenzen aufwerfen.
Après un processus accéléré de sécularisation des sociétés en Europe après la 2ème Guerre Mondiale, au début du XXIème , la place de la religion dans la société est redevenue un topique dans les débats politiques, notamment depuis que des courantes islamistes radicaux ont commencé à réaliser des actes terroristes aussi au dehors des pays majoritairement musulmans.
Même si déjà depuis la Révolution Islamique iranienne, le FN a essayé d’établir un lien entre les personnes d’origine maghrébines en France et cette courante d’islamisme politique, dans le contexte actuelle, le discours xénophobe du Front National a été complété désormais par un discours décidément islamophobe. Ce nouvel positionnement du FN ne fait pas l’exception en Europe même si la situation française est spécifique à cause de sa tradition de laïcité.
L’objective de cette article est d’analyser l’image que les trois religions abrahamites reçoivent dans les textes programmatiques les plus récents du FN et de les comparer avec ceux d’autres partis d’extrême droite populiste qui ont eu un certain succès lors des élections dans des pays de l’Union Européenne, tel que la Lega Nort en Italie, le Vlaams Belang en Belgique, La Plataforma per Catalunya en Espagne, le Dansk Folkpartiet au Danemark, le FPÖ en Autriche, le PVV au Pays-Bas, les Sverigedemokraterna en Suède et plus récemment l’Alternative für Deutschland (AfD) en Allemagne.
Est-ce qu’il y a un discours transeuropéen des extrêmes droites populistes quant à l’islam et quelle est la place du christianisme et du judaïsme ? Quelle sont les représentations de ces trois religions abrahamites ? Est-ce qu’il est possible d’écrire des spécificités pour chaque parti dû à son histoire idéologique et les spécificités des relations Etat-Eglise dans les différents pays ?
Le corpus de cette analyse est constitué par les textes programmatiques les plus récents de chaque parti rendu disponible sur son site internet, complété éventuellement par d’autres documents accessibles sur le même site. L’analyse sera faite dans le cadre de l’analyse critique du discours.
The purpose of this study is to examine the relationship between contextual work-related factors in terms of job demands (workload-WL) and job resources (work flexibility-WF), work-life conflict (WLC) and the burnout dimension emotional exhaustion (EE) in a large population-based sample. Building on the job demands resources model (JDRM), we have developed the hypothesis that WL has an indirect effect on EE that is mediated by WLC. We conducted a secondary analysis using data from the Dresden Burnout Study (DBS, N = 4246, mean age (SD) = 42.7 years (10.5); 36.4% male). Results from structural equation modelling revealed that EE is positively associated with WL (β = 0.15, p = 0.001) and negatively associated with WF (β = -0.13, p = 0.001), also after accounting for potential confounding variables (demography, depressive symptoms, and lifetime diagnosis of burnout). Both effects are mediated by WLC (β = 0.18; p = 0.001 and β = 0.08; p = 0.001, respectively) highlighting the important role of WLC in employee health. In summary, WF may help to reduce burnout symptoms in employees, whereas WL may increase them. Study results suggest that both associations depend on WLC levels.
Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling
(2020)
Hybrid manufacturing, which, e.g., combines additive manufacturing with conventional machining processes, can be a way of overcoming limitations currently encountered in additive manufacturing. Cryogenic milling might be a viable option for hard-to-cut materials, as it leaves a contamination-free surface and can increase surface quality and tool life compared to conventional cooling concepts. In this study, the influence of cryogenic milling with carbon dioxide on titanium Ti-6Al-4V specimens manufactured with laser metal deposition (LMD) was investigated regarding tool wear and surface integrity in comparison to dry machining and machining with cooling lubricants. Moreover, additional layers of material were deposited on top of conventionally and cryogenically machined surfaces by means of LMD. The interface zone was then examined for defects. The milling process was closely monitored by means of thermal and high-speed imaging. Optical and tactile surface analysis provided evidence that lower roughness values and improved surface qualities could be obtained with cryogenic machining in comparison to dry machining. Moreover, significantly less tool wear was observed when a cryogenic cooling medium was applied. Although the utilization of conventional cooling lubricants resulted in satisfying surface qualities, substantial residual contamination on the milled surface was detected by means of fluorescence analysis. These contaminants are suspected to cause defects when the next layer of material is deposited. This is supported by the fact that pores were found in the weld bead applied on top of the milled specimens by means of LMD. Conversely, cryogenic machining resulted in very clean surfaces due to the residue-free evaporation of the coolant. Hence, a good metallurgical bonding between the weld bead and the milled substrate could be achieved. The results indicate the great potential of cryogenic milling in hybrid manufacturing, especially in terms of intermediate machining, as it provides residue-free surfaces for subsequent material deposition without an additional cleaning step and can significantly prolongate tool life.
Prussian blue (PB) layers were electrodeposited for the fabrication of Au/PB/Ag stacks to study the resistive switching effect. The PB layers were characterized by different techniques to prove the homogeneity, composition, and structure. Electrical measurements confirmed the bipolar switching behavior with at least 3 orders of magnitude in current and the effect persisting for the 200 cycles tested. The low resistance state follows the ohmic conduction with an activation energy of 0.2 eV.
This paper provides a critical reading of Janek Wasserman’s The Marginal Revolutionaries: How Austrian Economists Fought the War of Ideas. Wasserman depicts the evolution of the Austrian School from the 1860s until today, a particularly illuminating narrative for the readers of this journal. The breadth of portrayed economists, their cultural embeddedness in Austrian and US contexts, and the complexity of configurations across the school’s generations create a rich and readable story. The last third of the book suffers from allegations about the ideological agenda and institutional power of the Austrian economists which sometimes lack sufficient substantiation. The paper indicates how both in their theorizing and in their political activities, the Austrian economists can be seen as reformers instead of revolutionaries, and as constitutionalists instead of anti-democrats. Despite these disagreements, Wasserman’s portrayals evoke largely fair and challenging impulses both to scholars working in the Austrian research program and to those interested in the Austrian School’s long history, regardless of one’s ideological positions.
Hintergrund/Zielstellung: Aufgrund des gestiegenen Informationsbedürfnisses von Patienten wird für Ärzte ein eigener Webauftritt als Informationsmittler mit dem Ziel der Patientengewinnung und -bindung zunehmend bedeutsam. In der vorliegenden Studie wurde daher die Patientenorientierung der Internetauftritte niedergelassener Fachärzte für Orthopädie und/oder Unfallchirurgie in Sachsen untersucht.
Methode/Stichprobe: Alle Websites der im Arztregister der Kassenärztlichen Vereinigung Sachsen gelisteten Fachärzte für Orthopädie und/oder Unfallchirurgie wurden mithilfe einer standardisierten Checkliste analysiert.
Ergebnisse: Von allen untersuchten Fachärzten (n = 349) besaßen 140 (40,1 %) einen eigenen Internetauftritt. In der Arztpraxis durchgeführte diagnostische Methoden und Therapiemaßnahmen wurden auf je ca. 90,0 % der Websites genannt und auf ca. der Hälfte hiervon erklärt. Der Kontrast konnte auf 10 Websites angepasst werden. Eine Meinungsäußerung wurde den Patienten auf 28 Websites ermöglicht. Rechtlich verpflichtende Impressuminhalte wurden auf 45,0 % der Internetauftritte nicht hinreichend beachtet.
Diskussion/Schlussfolgerung: Die Ergebnisse weisen darauf hin, dass die Gestaltung der Internetauftritte sowie deren Informationsgehalt differieren und Verbesserungspotenziale existieren. Ein standardisierter Kriterienkatalog könnte ein einheitliches Qualitätsniveau gewährleisten und von den Ärzten als Handlungsempfehlung genutzt werden.
Dissipation energy based parameter identification of anisotropic linear viscoelastic composites
(2020)
The current work presents a relaxation analysis based procedure to identify effective material parameters of the multiaxial generalized Maxwell model (GMM) by a numerical homogenization of the microscopic dissipation energy density for anisotropic linear viscoelastic composites. The employed GMM enables the derivation of a thermodynamically consistent constitutive law and a function of the dissipation energy density for direction‐dependent viscoelastic materials. The identity of this energy function to the microstructure's homogenized dissipation energy density is utilized for the identification of effective relaxation times. Furthermore, the identified relaxation times enable a simple determination of the remaining stiffness parameters. Finally, the presented procedure is demonstrated and evaluated for a randomly endless fibre‐reinforced plastic with a polymer matrix exhibiting a significant viscoelastic behaviour.
Lewis–Mogridge Points: A Nonarbitrary Method to Include Induced Traffic in Cost-Benefit Analyses
(2020)
We propose a new method to estimate benefits of road network improvements, which allows to include the induced demand without arbitrary assumptions. Instead of estimating induced demand (which is nontrivial and hardly possible in practice), we search for demand induction where initial benefits are mitigated to zero. Such approach allows to formulate a dual measure of benefit, covering both the potential benefits and the likelihood of consuming them by the induced traffic. We first estimate benefits of road network improvement assuming that traffic demand is fixed. Consequently, we find demand model configurations at which the benefits of the new investment become null, i.e., all the initial benefits are consumed by the traffic demand growth. We call such states of induced demand the Lewis–Mogridge points of the analysed improvement. We select the most probable of such points and use it to calculate the proposed novel indicator μ, for which the initial benefits (obtained under a fixed-demand assumption) are multiplied with a demand increase rate needed to consume them. We believe that such measure allows to include the critical phenomena of induced traffic and, at the same time, to overcome problems associated with reliable estimation of induced demand. As we illustrate with the case of two alternative road improvement schemes in Kraków, Poland, the proposed method allows to estimate maximal threshold of induced traffic and to select scenario more resilient to induced traffic.
Recent surveys and political research have shown that the acceptance of the political programmes of populist parties, such as the “Alternative für Deutschland (AfD)”, is relatively high amongst the population of the three eastern German federal states, especially in Saxony, where the AfD won nine of the 13 rural districts during the local elections in May 2019. Thus, it seems relevant to take a closer look at the persuasive discourse of a so-called populist party. In its public discourse, the AfD responds to the fears and concerns of those people who tend to use social media platforms to gain information when making political decisions. The aim of the article is to show which verbal and visual resources characterize the persuasive discourse of the AFD Saxony on their Facebook account. For this purpose, we propose a qualitative, multimodal analysis of selected entries which the party uploaded on its Facebook account between November 2018 and March 2019.
Integration und Migration werden in Deutschland nie an Bedeutung verlieren. Ob als Gastarbeiter in den 1950er Jahren, Flüchtling in den 1970er Jahren oder Vertragsarbeiter in den 80ern, Deutschland hat über Jahre hinweg zahllose Migranten aufgenommen. Doch keine Migrantengruppe wird derzeit in den Medien positiver erwähnt als die der Vietnamesen.
Ziel dieser Arbeit ist es aufzuzeigen, wie sich die Integration der Vietnamesen aus deutscher und vietnamesischer Sicht unterscheiden bzw. ähneln. Dazu wurden folgende Forschungsfragen gestellt: Sehen die deutschen Bürger die Vietnamesen tatsächlich als voll integriert? Und wie schätzen die Vietnamesen selbst ihre Integration ein? Um diese Fragen zu beantworten, sind vier qualitative Interviews mit zwei deutschen Staatsbürgern deutscher Herkunft, einer Vietnamesin, die in die damalige DDR als Vertragsarbeiterin kam, und einer Vietnamesin zweiter Generation, die in Deutschland geboren und aufgewachsen ist, durchgeführt worden. Die Interviews wurden auf Meinungen im Hinblick auf die vietnamesische Integration untersucht. Im Großen und Ganzen kann gesagt werden, dass trotz einiger Divergenzen hinsichtlich der geäußerten Sichtweisen, die Interviewten fast einstimmig der Meinung sind, Vietnamesen seien gut in die deutsche Gesellschaft eingegliedert - auch wenn das, was sie unter Integration verstehen, teilweise stark von den wissenschaftlichen Definitionen abweicht.
In diesem Artikel wird eine allgemeine Analyse der Stakeholder einer digitalen Produktion bearbeitet. Dabei kommt das Ishikawa-Diagramm für die Analyse zum Einsatz und wird erarbeitet. Über eine Betrachtung des Shopfloors bis hin zu den einzelnen Maschinen wird über den Einsatz von Betrachtungsmethoden des Lean Management die Analyse durchgeführt und ein möglichst umfangreiches Anforderungsbild für die Digitalisierung einer Produktion erarbeitet.