open_access
Refine
Document Type
- Article (64)
- Book (13)
- Part of a Book (10)
- Working Paper (5)
- Report (4)
- Other (2)
Institute
Language
- English (57)
- German (37)
- French (1)
- Multiple languages (1)
- Portuguese (1)
- Spanish (1)
Is part of the Bibliography
- yes (98)
This paper presents an analytical method for determining the bending stresses and deformations in prismatic, noncircular profile shafts with trochoidal cross sections. The so-called higher trochoids can be used as form-fit shaft-hub connections. Hybrid (mixed) higher trochoids (M-profiles) were developed for the special application as a profile contour for the form-fit shaft and hub connections in an earlier work by the author. M-profiles combine the advantages of the two standardised polygonal and spline contours, which are used as shaft-hub connections for the transmission of high torques. In this study, the geometric and mechanical properties of the higher hybrid trochoids were investigated using complex functions to simplify the calculations. The pure bending stress and shaft deflection were determined for M-profiles using bending theory based on the theory of mathematical elasticity. The loading cases consisted of static and rotating bends. Analytical, numerical, and experimental results agreed well. The calculation formulas developed in this work enable reliable and low-cost dimensioning with regard to the stresses and elastic deformations of profile shafts subjected to bending loads.
The atomizing gas dynamics and the applied process energy have a significant influence on the produced particles. The melting process of the two wires can be influenced by current modulation. As for arc welding processes, more and more electronic and software-controlled machines are being used for arc spraying and will have replaced conventional power sources in the future. Due to the highly dynamic, fast regulating computing technology in the latest energy source, technology arcs can be operated with different current forms and types. The modern machines allow process-stable, reproducible variation of the particles and heat input into the substrate. Constant and pulsed current can be used as current forms. Usable current types are direct current (DC) and alternating current (AC). The electrical parameters must be analyzed to evaluate the process behavior. The consumable used is a wire-shaped iron-based alloy with a diameter of 1.6 mm. Relevant process parameters such as basic current Iground, pulse current Ipulse, pulse duration tpulse, impulse frequency fpulse, and alternating current frequency, fAC, are varied and recorded using appropriate measurement technology. The aim is to change the process performance and thereby the particle formation in a broad band. High-speed images are used to observe the arc and the deposition process. In addition, particle sizes are determined.
The removal of bacterial infections within the root canal system is still a challenge. Therefore, the cleansing effect of established and new irrigation-protocols (IP) containing silver diamine fluoride (SDF) 3.8% on the whole root canal system was analyzed using quantitative PCR (qPCR) and 4′,6-diamidino-phenylindole-(DAPI)-staining. Extracted human premolars were instrumented up to F2 (ProTaper Gold) under NaCl 0.9% irrigation and incubated with Enterococcus faecalis for 42 days. Subsequently, different ultrasonically agitated IP were applied to the roots: control (no irrigation), 1. NaOCl 3%, EDTA 20%, CHX 2%, 2. NaOCl 3%, EDTA 20%, 3. NaOCl 3%, EDTA 20%, SDF 3.8%, 4. SDF 3.8%, and 5. NaCl 0.9%. One half of the root was investigated fluorescent-microscopically with DAPI. The other half was grinded in a cryogenic mill and the bacterial DNA was quantified with qPCR. The qPCR results showed a statistically significant reduction of bacteria after the application of IP 1, 2, and 3 compared to the control group. While IP 4 lead to a bacterial reduction which was not significant, IP 5 showed no reduction. These data corresponded with DAPI staining. With qPCR a new molecular-biological method for the investigation of the complete root canal system was implemented. The novel IP 3 had an equally good cleansing effect as the already established IP.
This article presents a cost-effective ultraviolet-ozone cleaner (UV/O3 Cleaner) for surface pre-treatment of substrates in the field of semiconductor technology. The cleaner consists of two chambers, the upper one contains the electronics, including the time counter. The lower chamber contains the two UV sterilisation lamps and a UV reflector of anodized aluminium, which confines the area of high Ozone concentration in the area of interest. The device is successfully used for surface cleaning and modification of different materials. To this end, the two important wavelengths 253.7 nm (excitation of organic residues) and 184.9 nm (production of ozone from the atmospheric environment as a strong oxidant) were first detected. The effectiveness of UV/O3 cleaning is demonstrated by improving the properties of indium tin oxide (ITO) for OLED fabrication. The contact angle of water to ITO could be reduced from 90° to 3° and for diiodomethane, it was reduced from 55° to 31° within the 10 min of irradiation. This greatly improved wettability for polar and non-polar liquids can increase the flexibility in further process control. In addition, an improvement in wettability is characterized by measuring the contact angles for titanium dioxide (TiO2) and polydimethylsiloxane (PDMS). The contact angle of water to TiO2 decreased from 70° to 10°, and that of diiodomethane to TiO2 from 54° to 31°. The wettability of PDMS was also greatly increased. Here, the contact angle of water was reduced from 109° to 24° and the contact angle to diiodomethane from 89° to 49°.
Article Highlights
We report a cost-effective dry-cleaning device for surface cleaning and modification based on ultraviolet-ozone irradiation.
Contact angle measurements show an increase of wettability for different materials due to surface modification.
The UVO3 pre-treatment improves layer formation and optoelectrical properties of OLEDs.
Development and Characterization of a Dispersion-Encoded Method for Low-Coherence Interferometry
(2022)
This Open Access book discusses an extension to low-coherence interferometry by dispersion-encoding. The approach is theoretically designed and implemented for applications such as surface profilometry, polymeric cross-linking estimation and the determination of thin-film layer thicknesses. During a characterization, it was shown that an axial measurement range of 79.91 µm with an axial resolution of 0.1 nm is achievable. Simultaneously, profiles of up to 1.5 mm in length were obtained in a scan-free manner. This marked a significant improvement in relation to the state-of-the-art in terms of dynamic range. Also, the axial and lateral measurement range were decoupled partially while functional parameters such as surface roughness were estimated. The characterization of the degree of polymeric cross-linking was performed as a function of the refractive index. It was acquired in a spatially-resolved manner with a resolution of 3.36 x 10-5. This was achieved by the development of a novel mathematical analysis approach.
Experimental tests on the type-approval of motor vehicles with regard to safety belt anchorages, ISOFIX anchorages and ISOFIX top anchorages have been carried out in accordance with Regulation No. 14 UNECE. From the design stage, the safety belt anchorages must comply with the requirements for the installation of a safety belt and reduce slipping and damage to the belt while wearing it. These can be components of the seat structure or of the body's resistance structure, which have the role of fastening the seat belts. The position of the anchor points is determined by the R point. The R point is defined as the seat reference point on the seat. This point is set by the vehicle manufacturer for each seat in the vehicle. In this paper, two models of chairs were tested. Both seat models are equipped with seat belts anchored at three anchor points. Seat belt anchorages were tested simultaneously using parallel force devices. These traction devices are placed on the seat cushion and are pressed into the seat back. The pulling device has a vertical pulling arm, which has the role of anchoring the steel wire cables. Two test forces are applied simultaneously to the anchor points during the test.
This study aimed to investigate the component structural behaviour and response under overturned truck crash that subsequently collides with road-side pole or tree. The safety of the truck occupants in an accident is very important and should be considered in the process of cabin design. Specific focus will be on the structural integrity of the truck cabin in response to a collision with a cylindrical pendulum. In the past, dynamic analysis was done by real world testing. Nowadays crash simulation is proven to be much more efficient by being a virtual representation of destructive crash impact and providing opportunities to reduce the number of physical prototypes consumed for design verification, thus reducing development time. According to cab strength tests (ECE R29), the cabin body of the truck shall be attached to the chassis in such a way that in the event of impact it ensures a sufficient survival space and eliminates the risk of injury. This paper investigates the FE (finite element) simulation of a frontal impact on the cabin structure to validate the cabin according to the ECE regulation 29 tests. The study also includes the assessment of the energy absorption capabilities of the cabin during the pendulum impact. The pendulum impact was carried out using Ansys LS-Dyna explicit solver to evaluate the cabin strength under the loads.
The demand for thorough disinfection within ambulances is essential, given the in-vehicle medical procedures and the potential high risk of infections due to patients' open wounds. One solution that can address this hygiene challenge involves the application of reactive products generated from atmospheric (air) oxygen and water vapor, activated through the use of cold plasma. Cold plasma's charged particles perforate the cell membranes of microorganisms. This process does not work in human cells, as proteins in the form of enzymes within the body break down the cold plasma and protect the cells. The study was done on an ambulance that was contaminated in eight places. Samples were taken from each site, and two surfaces measuring approximately 8 × 8 cm were carefully sealed and marked. These surfaces were deliberately contaminated by applying an Enterococcus faecium suspension of 8.5 × 107 CFU/mL using a sterile cotton swab. It was followed by the disinfection procedure, that was initiated with the PLASMOCAR device. It was positioned on the front workspace and operated for a duration of 30 min, utilizing the vehicle's onboard voltage. Throughout the operation, all doors and windows were closed and the vehicle's air conditioning system remained active. After the completion of the disinfection process, samples were collected from the surfaces for bacterial counts. A reduction of 3.73 log levels in initial bacteria was accomplished within the rescue vehicle for Enterococcus faecium, equivalent to a 10–fourfold reduction in bacteria, eliminating up to 99.99% of the initial microorganisms. This success makes the process well-suited and convenient as an ongoing "background" procedure to enhance the established disinfection procedures. The established disinfection procedures outlined in the hygiene plan must be promptly implemented whenever mechanical surface cleaning is required. The use of PLASMOCAR offers an extra layer of protection and security, significantly decreasing the risk of microorganism transmission through cross-contamination and aerosols. This is a significant benefit for the well-being of both staff and patients.
Die Seminararbeit untersucht die Bedeutung der strategischen Personalentwicklung und Kompetenzförderung im spezialisierten Bereich des Sondermaschinenbaus, mit einem Fokus auf die Praxis der Skill-Checks in einem deutschen Unternehmen. Sie beleuchtet die Auswirkungen des demografischen Wandels, der rasanten technologischen Entwicklungen und der Globalisierung auf den Bedarf an Fachkräften mit spezifischen technischen und sprachlichen Kompetenzen. Durch eine detaillierte Analyse der bestehenden Ausbildungs- und Weiterbildungsprozesse werden Schwachstellen aufgezeigt. Die Arbeit schlägt Lösungsansätze vor, wie durch strukturierte Weiterbildungsprogramme und verbesserte Auswahlverfahren diesen Herausforderungen effektiv begegnet werden kann, um die Wettbewerbsfähigkeit zu stärken.
Auf digitalen Märkten besteht, wer die zugrundeliegenden digitalen, unternehmensbezogenen oder akteursübergreifenden institutionellen Arrangements versteht und aktiv gestaltet. Dazu werden ausgereifte, von Forschung und Praxis diskutierte und gemeinsam weiter entwickelte Methoden zum Design digitaler Plattformen, Geschäftsmodelle und Service-Ökosysteme benötigt. Einen gemeinschaftlichen Aufschlag hierzu macht der folgende Artikel. Er entstand aus einem offenen Aufruf in der Wirtschaftsinformatik-Community – über Mailing-Listen und soziale Medien. Im Ergebnis führen sieben Forschergruppen (oder einzelne Forscher und Forscherinnen) ihre aktuellen Erkenntnisse zu diesem Thema zusammen.
Recent surveys and political research have shown that the acceptance of the political programmes of populist parties, such as the “Alternative für Deutschland (AfD)”, is relatively high amongst the population of the three eastern German federal states, especially in Saxony, where the AfD won nine of the 13 rural districts during the local elections in May 2019. Thus, it seems relevant to take a closer look at the persuasive discourse of a so-called populist party. In its public discourse, the AfD responds to the fears and concerns of those people who tend to use social media platforms to gain information when making political decisions. The aim of the article is to show which verbal and visual resources characterize the persuasive discourse of the AFD Saxony on their Facebook account. For this purpose, we propose a qualitative, multimodal analysis of selected entries which the party uploaded on its Facebook account between November 2018 and March 2019.
Nell’esame del corpus grafico ascritto a Michelangelo Buonarroti ruolo preminente rivestono, soprattutto, i quesiti circa l’autografia dei disegni e la loro relazione con le opere d’arte (vedi l’introduzione “Michelangelo als Zeichner”). Il contributo “Michelangelo abbreviatore”, viceversa, focalizza l’attenzione sul fenomeno degli elementi grafici di sigla o cifra, cioè di abbreviazione. Questi sono, tuttavia, da distinguere rispetto ad altre tecniche grafiche di riduzione e abbreviazione come, ad esempio, l’uso di differenti gradi di elaborazione e densità grafiche all’interno di un singolo disegno, come anche dell’abbozzo di dettagli frazionati, talvolta apparentemente isolati. Tali aspetti si incontrano spesso, soprattutto a beneficio dell’economia del lavoro e del tempo, per delineare un particolare e specifico soggetto e rappresentano una peculiarità spesso descritta e ben nota del disegno michelangiolesco in generale – essendo, d’altra parte, riscontrabili non solo nell’ambito del disegno di figura, ma anche in quello di architettura.
È superfluo ricordare che tali abbreviazioni, solo rapidamente abbozzate (come nel caso di “premières pensées”), nella loro forma di rappresentazione frammentaria o fortemente ridotta, quasi stenografata, siano in grado di sviluppare e contenere un concetto artistico – per lo meno nel caso dei “veri” disegni di Michelangelo (cioè disegni autografici) realizzati comunque, per la maggior parte, per la genesi dell’opera, per così dire per scopi intrinseci, e in un certo senso come “studi” e “fogli di lavoro”. Per la maggior parte dei casi, difatti, non era previsto che terzi, ad esempio committenti e colleghi artisti, vedessero questo materiale di lavoro e le abbreviazioni e l’incompiutezza ivi contenute; queste persone, dunque, non dovevano, e neanche sarebbero state in grado, di decifrarle. In ogni caso, i collaboratori e – nel senso più ampio del termine – soprattutto gli allievi, si sarebbero potuti esercitare su questi fogli raggiungendo differenti gradi di successo e profitto.
Laddove, però, l’abbreviazione viene applicata come autentico mezzo grafico-artistico, essa indica invece un motivo determinato, non incompleto, non rivestendo neppure la mera funzione di segnaposto per elementi formali integrabili con facilità in un secondo momento. Piuttosto, la stessa è perfetta nella sua sintesi e contiene non solo un significato originario, un’espressione di grado e valore proprio, ma anche manifestazioni di penetrante e acuto umorismo. E in questi casi specifici, così sembra, l’abbreviazione autonoma si rivolge esplicitamente anche a terzi, invitandoli all’esercizio dell’osservazione e della decifrazione.
Sodium iron hexacyanoferrate (NaFeHCF) films were electrodeposited on Au/Cr/Si for the study of growth behavior and physical properties. The NaFeHCF films were studied by different analytical methods to prove the chemical composition, morphology and crystal structure. The grains of the film grow with a cubic structure with an average lattice parameter of 10.10 Å and the preferential growth direction along the [111] direction of the cubic cell. The films show a repeatable bipolar resistive switching behavior accompanied by high current changes (up to a factor of ~105). The different resistive states in the materials are dominated by ohmic conduction.
Traffic calming is introduced to minimise the negative results of motor vehicle use, for example, low safety level or quality of life, high noise and pollution. It can be implemented through the introduction of road infrastructure reducing the velocity and the traffic volume. In this paper, we studied how traffic-calming influences the traffic assignment. For the research, a traffic-calming measure of speed cushions on the Stachiewicza street in Krakow was taken. A method of extracting trajectories from aerial footage was shown, and it was used to build a model. For a given example, through driving characteristics research and microscopic modelling, volume–delay BPR functions were estimated—for a street with and without traffic calming. Later, a toy network of two roads of the same length, connecting the same origin and destination, was simulated using an equilibrium traffic assignment method. Simulations were conducted both with the use of PTV Vissim and Visum software and through individual calculations. According to the results of this paper, there was a difference in traffic volume according to the equilibrium traffic assignment in the aforementioned toy network as a function of total network traffic volume.
En 1985 inició el Ministerio de Educación en Venezuela el Modelo de Atención Integral al Niño Sordo, un cambio de la práctica oralista a un modelo bilingüe en las escuelas de sordos. Eso implicaba eliminar la enseñanza del español hablado como objetivo principal e introducir la Lengua de Señas Venezolana (LSV) a las escuelas. Se desencadenó así un intenso período de cambios que marcó indeleblemente a la comunidad sorda. Aquí se aborda el Modelo desde la perspectiva de la planeación lingüística, describiendo sus objetivos y sus efectos sobre la adquisición, la estructura (el corpus) y el estatus de la LSV: La LSV y el español señado fueron reubicados en la diglosia existente hasta entonces; surgió una variante académica de la LSV y aumentó el número de usuarios de la LSV. El estudio se basó en el análisis cualitativo de entrevistas realizadas a cinco testigos de aquel proceso.
Conceptual Approach to an AI-Based Adaptive Study Support System for Individualized Higher Education
(2023)
In the context of the digital transformation, the targeted implementation of AI-based or AI-supported technologies in "teaching & learning" as well as "administration & service" holds considerable potential for organizational change and quality enhancement for higher education institutions. The use of AI in higher education teaching and services lags behind the level in research. Therefore, holistic solutions must be planned and implemented in unity of teaching and research for the AI-based support of the stakeholders’ inclusive administration, the further development or the establishment of new digital study programs and offers as well as the prospective qualification of university staff in the field of AI. The solutions must be analyzed, systematized, and structured to generate a conceptual approach via an integrated architecture with adaptive services.
This paper is an evolution of the concept presented at the Learning Ideas Conference 2022 and includes, in addition to explanations of the current state of the arts, the presentation of a systems-oriented approach for AI in higher education as well as the conception of the student lifecycle management at the author’s university. The paper ends with the presentation of a concept regarding a decision support system for individualized studying.
Analgesic drug use of recreational and competitive badminton players: Starting points for prevention
(2021)
Objectives: Evidence-based clinical guidelines play an important role in healthcare and can be a valuable source for quality indicators (QIs). However, the link between guidelines and QI is often neglected and methodological standards for the development of guideline-based QI are still lacking. The aim of this qualitative study was to get insights into experiences of international authors with developing and implementing guideline-based QI.
Setting: We conducted semistructured interviews via phone or skype (September 2017–February 2018) with guideline authors developing guideline-based QI.
Participants: 15 interview participants from eight organisations in six European and North American countries.
Methods: Organisations were selected using purposive sampling with a maximum variation of healthcare settings. From each organisation a clinician and a methodologist were asked to participate. An interview guide was developed based on the QI development steps according to the ‘Reporting standards for guideline-based performance measures’ by the Guidelines International Network. Interviews were analysed using qualitative content analysis with deductive and inductive categories.
Results: Interviewees deemed a programmatic approach, involvement of representative stakeholders with clinical and methodological knowledge and the connection to existing quality improvement strategies important factors for developing QI parallel to or after guideline development. Methodological training of the developing team and a shared understanding of the QI purpose were further seen conducive. Patient participation and direct patient relevance were inconsistently considered important, whereas a strong evidence base was seen essential. To assess measurement characteristics interviewees favoured piloting, but often missed implementation. Lack of measurability is still experienced a serious limitation, especially for qualitative aspects and individualised care.
Conclusion: Our results suggest that developing guideline-based QI can succeed either parallel to or following the guideline process with careful planning and instruction. Strategic partnerships seem key for implementation. Patient participation and relevance, measurement of qualitative aspects and piloting are areas for further development.
Trial registration number: German Clinical Trials Registry (DRKS00013006).
This article aims to identify the status quo of sustainability covenants firstly, secondly analyze their possibilities in enhancing sustainability performance and thirdly present further research directions. Covenants are additional contractual agreements mainly used in financial contracts, e.g. loans. They often focus on financial performance indicators, e.g., equity and net debt ratio, which the borrower must fulfil. However, the purpose of this article is to present a new approach to non-financial covenants, so-called sustainability covenants. Therefore, also nowadays ecological and social challenges are addressed. Banks have a huge impact on sustainable development by introducing more non-financial indicators in evaluating the creditability of borrowers. As a key hypothesis, this article argues that the approach of integrating ecological and social objectives through non-financial covenants is underrepresented in economic and business practice. Therefore, this article wants to examine how those objectives can be integrated into the financial concept of covenants and rely on research towards an integrative sustainability approach. In addition, a systematic literature review was conducted from October 2022 to July 2023 to analyze the status quo and derive future research directions. The review was based on two databases – Google Scholar and Scopus. As one key result, it was revealed that there is scarce existing literature on sustainability covenants, which refers to them as a policy measure. Only a few publications analyze their usage in financial contracts. However, this study implies the necessity for further research on sustainability covenants, emphasizing that they are powerful indicators to enhance the sustainability performance of the borrower.
Integration und Migration werden in Deutschland nie an Bedeutung verlieren. Ob als Gastarbeiter in den 1950er Jahren, Flüchtling in den 1970er Jahren oder Vertragsarbeiter in den 80ern, Deutschland hat über Jahre hinweg zahllose Migranten aufgenommen. Doch keine Migrantengruppe wird derzeit in den Medien positiver erwähnt als die der Vietnamesen.
Ziel dieser Arbeit ist es aufzuzeigen, wie sich die Integration der Vietnamesen aus deutscher und vietnamesischer Sicht unterscheiden bzw. ähneln. Dazu wurden folgende Forschungsfragen gestellt: Sehen die deutschen Bürger die Vietnamesen tatsächlich als voll integriert? Und wie schätzen die Vietnamesen selbst ihre Integration ein? Um diese Fragen zu beantworten, sind vier qualitative Interviews mit zwei deutschen Staatsbürgern deutscher Herkunft, einer Vietnamesin, die in die damalige DDR als Vertragsarbeiterin kam, und einer Vietnamesin zweiter Generation, die in Deutschland geboren und aufgewachsen ist, durchgeführt worden. Die Interviews wurden auf Meinungen im Hinblick auf die vietnamesische Integration untersucht. Im Großen und Ganzen kann gesagt werden, dass trotz einiger Divergenzen hinsichtlich der geäußerten Sichtweisen, die Interviewten fast einstimmig der Meinung sind, Vietnamesen seien gut in die deutsche Gesellschaft eingegliedert - auch wenn das, was sie unter Integration verstehen, teilweise stark von den wissenschaftlichen Definitionen abweicht.
Hybrid manufacturing of titanium Ti-6Al-4V combining laser metal deposition and cryogenic milling
(2020)
Hybrid manufacturing, which, e.g., combines additive manufacturing with conventional machining processes, can be a way of overcoming limitations currently encountered in additive manufacturing. Cryogenic milling might be a viable option for hard-to-cut materials, as it leaves a contamination-free surface and can increase surface quality and tool life compared to conventional cooling concepts. In this study, the influence of cryogenic milling with carbon dioxide on titanium Ti-6Al-4V specimens manufactured with laser metal deposition (LMD) was investigated regarding tool wear and surface integrity in comparison to dry machining and machining with cooling lubricants. Moreover, additional layers of material were deposited on top of conventionally and cryogenically machined surfaces by means of LMD. The interface zone was then examined for defects. The milling process was closely monitored by means of thermal and high-speed imaging. Optical and tactile surface analysis provided evidence that lower roughness values and improved surface qualities could be obtained with cryogenic machining in comparison to dry machining. Moreover, significantly less tool wear was observed when a cryogenic cooling medium was applied. Although the utilization of conventional cooling lubricants resulted in satisfying surface qualities, substantial residual contamination on the milled surface was detected by means of fluorescence analysis. These contaminants are suspected to cause defects when the next layer of material is deposited. This is supported by the fact that pores were found in the weld bead applied on top of the milled specimens by means of LMD. Conversely, cryogenic machining resulted in very clean surfaces due to the residue-free evaporation of the coolant. Hence, a good metallurgical bonding between the weld bead and the milled substrate could be achieved. The results indicate the great potential of cryogenic milling in hybrid manufacturing, especially in terms of intermediate machining, as it provides residue-free surfaces for subsequent material deposition without an additional cleaning step and can significantly prolongate tool life.
Die Autoren bringen langjährige Erfahrung in verschiedenen Industriebranchen und der akademischen Ausbildung im Lean- und Project and Process Management mit sich. Im Rahmen der beruflichen Tätigkeit und der akademischen Arbeit hat sich immer wieder die Frage gestellt, wie die Philosophie des Lean Management mit den Aufgaben des Projekt Management Office interagieren können. Viele Ansätze des Lean Management, vor allem organisatorische Methoden zeigen eine breite Anwendungsmöglichkeit und sollten somit auch dem Projekt Management Office (PMO) hilfreich sein. Vor einiger Zeit hat sich schon der Begriff des Lean Office [YDF01] etabliert, der aber sowohl in der Büroorganisation als auch der Dokumentenpflege Ansatz findet. Im Rahmen des PMO soll dieser Lean Office auf die bereitzustellenden Prozesse und deren Integration ins Enterprise Ressource Planning Anwendung finden. Je schlanker und effizienter die Projekt- und Programmprozesse einer Organisation aufgestellt werden, desto leichter können diese abgebildet und in die Enterprise Ressource Planning (ERP)-Datenlandschaft übertragen werden. Somit wird ein solider Grundstein über den gesamten Produktprozess gelegt - von der Entwicklung, über die Herstellung bis hin zur schlussendlichen Verwertung schlank, effizient, automatisiert und digitalisiert abgebildet zu sein.
Dissipation energy based parameter identification of anisotropic linear viscoelastic composites
(2020)
The current work presents a relaxation analysis based procedure to identify effective material parameters of the multiaxial generalized Maxwell model (GMM) by a numerical homogenization of the microscopic dissipation energy density for anisotropic linear viscoelastic composites. The employed GMM enables the derivation of a thermodynamically consistent constitutive law and a function of the dissipation energy density for direction‐dependent viscoelastic materials. The identity of this energy function to the microstructure's homogenized dissipation energy density is utilized for the identification of effective relaxation times. Furthermore, the identified relaxation times enable a simple determination of the remaining stiffness parameters. Finally, the presented procedure is demonstrated and evaluated for a randomly endless fibre‐reinforced plastic with a polymer matrix exhibiting a significant viscoelastic behaviour.
Background: Stroke is one of the most frequent causes of death in Germany and the developed countries. After a stroke, those affected often suffer particularly from functional motor restrictions of the upper extremities. Newer techniques such as the BCI-FES systems aim to establish a communication channel between the brain and external devices with a neuromuscular intervention. The electrical activity of the brain is measured, processed, translated into control signals and can then be used to control an application.
Methods: As a mixed-methods design (exploratory design), eight guideline-based expert interviews were conducted first. For the quantitative expert survey, 95 chief physicians from the field of neuromedicine in rehabilitation facilities nationwide were subsequently invited to participate in an online survey.
Results: In our data analysis, we found that doctors are largely open-minded towards new technical rehabilitation systems. In addition to the proper functioning of the system, they consider the understanding of the functionality and the meaningfulness of the system to be particularly important. In addition, the system should be motivating for individuals, generate meaningful movements, be easy to use, evidence-based and quick to set up. Concerns were expressed regarding the understanding of the system’s processes, especially in the acute phase after a stroke, as well as the excessive expectation of results from the system on the part of the persons. The experts named stroke patients in rehabilitation phase C, which is about mobilization and recovery, as well as all persons who can understand the language requirements as benefiting groups of people.
Conclusion: The present study shows that more research should and must be done in the field of BCI-FES interfaces, and various development trends have been identified. The system has the potential to play a leading role in the rehabilitation of stroke patients in the future. Nevertheless, more work should be done on the improvement and implementation as well as the system’s susceptibility to interference in everyday patient life.
This paper presents numerical analysis of the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice. Additionally, to provide estimates in interior and exterior domains, two different regularisations of the discrete fundamental solution are considered. Estimates for the absolute difference and lp‐estimates are constructed for both regularisations. Thus, this work extends the classical results in the discrete potential theory to the case of a rectangular lattice and serves as a basis for future convergence analysis of the method of discrete potentials on rectangular lattices.
Based on a real-world application in the semiconductor industry, this article models and discusses a hybrid flow shop problem with time dependencies and priority constraints. The analyzed problem considers a production where a large number of heterogeneous jobs are processed by a number of machines. The route that each job has to follow depends upon its type, and, in addition, some machines require that a number of jobs are combined in batches before starting their processing. The hybrid flow model is also subject to a global priority rule and a “same setup” rule. The primary goal of this study was to find a solution set (permutation of jobs) that minimizes the production makespan. While simulation models are frequently employed to model these time-dependent flow shop systems, an optimization component is needed in order to generate high-quality solution sets. In this study, a novel algorithm is proposed to deal with the complexity of the underlying system. Our algorithm combines biased-randomization techniques with a discrete-event heuristic, which allows us to model dependencies caused by batching and different paths of jobs efficiently in a near-natural way. As shown in a series of numerical experiments, the proposed simulation-optimization algorithm can find solutions that significantly outperform those provided by employing state-of-the-art simulation software.
Die Publikation untersucht die Einordnung der Führung in den Managementkontext und stellt das Konzept "Digital Leadership" als neue Managementkompetenz vor. Sie identifiziert Grundanforderungen an die Führungsrolle und betont die Herausforderungen für Führungskräfte in der digitalen Arbeitswelt. Dabei wird die Vielfalt der Grundanforderungen an die Führung aufgezeigt, indem die Wahl des Führungsstils, der Faktor „Motivation“ und das KLARA-Prinzip hervorgehoben werden. Der digitale Wandel erfordert die Anpassung der führenden Personen an die Herausforderungen der digitalen Transformation und die Fähigkeit, sich in verschiedene Führungsrollen hineinzuversetzen.
Die Publikation untersucht Home-Office im Kontext des "Digital Leadership", erörtert technische, organisatorische und führungspolitische Anforderungen und beleuchtet Chancen sowie Risiken dieser Arbeitsform. Es wird ein Überblick zur aktuellen Home-Office Situation in Deutschland gegeben. Zudem werden die Unternehmen "Compart AG" und "Microsoft" als Best-Practice-Beispiele hervorgehoben. Ziel ist es, die Voraussetzungen und erfolgreiche Umsetzungsmöglichkeiten des Home-Office zu analysieren.
Die Publikation analysiert die Arbeitssituation im Home-Office in Deutschland und identifiziert Anforderungen an Führungskräfte und Mitarbeiter. Führungskräfte sollten den partizipativen Führungsstil anwenden, die Fähigkeit zu motivieren besitzen sowie moderne Technologien nutzen. Mitarbeiter werden zu Eigenmotivation, Feedback und eigenverantwortlichem Arbeiten angehalten. Positive Aspekte der Telearbeit sind Flexibilität und Zeitersparnis, während fehlende Tätigkeitseignung und mangelnde Interaktion als Nachteile gelten. Die Handlungsempfehlungen, welche in Form von Checklisten gestaltet sind, beschreiben die Anforderungen an Führungskräfte und Mitarbeiter an die Telearbeit. Das Fazit in Kapitel drei rundet die Ergebnisse ab.
Das Hauptziel der Arbeit ist die Analyse der o.g. Anforderungen und die Ableitung von Handlungsempfehlungen für das Home-Office.
Die für die Planung des Materialflusses relevanten Fertigungsprozesse lassen sich sehr genau planen, beispielsweise über die Leistung der Maschine (Durchsatz je Zeiteinheit). Bei der Planung eines Projektes spielen logistische Prozesse, die zu den Kernprozessen eines Unternehmens gehören, eine wichtige Rolle. Jedoch werden sie meist nur grob terminiert und mit großen Puffern kalkuliert. Dies kann zu einer Verlängerung der Projektdauer führen. Für eine genauere Terminierung eines Projektes ist es daher entscheidend, die Dauer der logistischen Prozesse mindestens in dem Maße wie die Fertigungsprozesse zu ermitteln, um das Risiko einer Projektverzögerung zu minimieren.In diesem Beitrag wird deshalb eine Methode zur datenbasierten Schätzung von Prozessdauern mit dem Ziel der Wiederverwendung von Projektwissen vorgestellt, die es dem Projektmanagement ermöglichen soll, Dauern von logistischen Prozessen präziser zu schätzen als das aktuell basierend auf Erfahrungswissen erfolgt. Besonderes Augenmerk liegt dabei auf der Herleitung der Entwurfsaktivitäten. Durch die Anwendung der Methode soll das Projektmanagement von einer genaueren, datenbasierten Schätzung von (Logistik‑)Prozessdauern profitieren und so entstandenes Wissen über einen Ontologieansatz wiederverwenden können.
Dynamically loaded structures made of thermoplastic polymers have been extensively exploited in several demanding industries. Due to the viscoelastic and thermal properties of thermoplastic polymers, self-heating is generally inevitable, especially during dynamic deformations at high frequencies. Therefore, the thermoplastic polyether ether ketone (PEEK), with its high temperature resistance and high specific strength, is a particularly ideal candidate for dynamically loaded applications. Using scanning laser Doppler vibrometry and infrared thermography, an experimental study of the vibration characteristics and the vibration-induced heating of flat-sheet PEEK specimens was carried out. The specimens were base-excited by means of a piezoelectric actuator at high frequencies in the range between 1 and 16 kHz. As a result, a maximum temperature rise of approximately 6.4 K was detected for the highest investigated excitation. A high correlation between the spatial distribution of the velocity along the beam’s axial direction and the resulting temperature increase was measured. To summarize, the occurring self-heating of PEEK due to the dissipation of vibrational energy has to be critically considered for dynamically loaded structural applications, especially areas with high displacement amplitudes, such as antinodes, which yield the highest temperature increase.
Models of artificial root canals are used in several fields of endodontic investigations and pre-clinical endodontic training. They allow the physical testing of dental treatments, the operating of instruments used and the interaction between these instruments and the tissues. Currently, a large number of different artificial root canal models exist whose geometry is created either on the basis of selected natural root canal systems or to represent individual geometrical properties. Currently, only a few geometric properties such as the root canal curvature or the endodontic working width are taken into consideration when generating these models. To improve the representational capability of the artificial root canal models, the aim of the current study is therefore to generate an artificial root canal based on the statistical evaluation of selected natural root canals. Here, the approach introduced by Kucher for determining the geometry of a root canal model is used, which is based on the measurement and statistical evaluation of the root canal center line’s curvatures and their cross-sectional dimensions. Using the example of unbranched distal root canals of mandibular molars (n = 29), an artificial root canal model representing the mean length, curvature, torsion and cross-sectional dimensions of these teeth could be derived.
Structures made of the thermoplastic polymer polyether ether ketone (PEEK) are widely used in dynamically-loaded applications due to their high-temperature resistance and high mechanical properties. To design these dynamic applications, in addition to the well-known stiffness and strength properties the vibration-damping properties at the given frequencies are required. Depending on the application, frequencies from a few hertz to the ultrasonic range are of interest here. To characterize the frequency-dependent behavior, an experimental approach was chosen and applied to a sample polymer PEEK. The test setup consists of a piezoelectrically driven base excitation of the polymeric specimen and the non-contact measurement of the velocity as well as the surface temperature. The beam’s bending vibrations were analyzed by means of the Timoshenko theory to determine the polymer’s storage modulus. The mechanical loss factor was calculated using the half-power bandwidth method. For PEEK and a considered frequency range of 1 kHz to 16 kHz, a storage modulus between 3.9 GPa and 4.2 GPa and a loss factor between 9 × 10−3 and 17 × 10−3 were determined. For the used experimental parameters, the resulting mechanical properties were not essentially influenced by the amplitude of excitation, the duration of excitation, or thermal degrad.ation due to self-heating, but rather slightly by the clamping force within the fixation area.
Lewis–Mogridge Points: A Nonarbitrary Method to Include Induced Traffic in Cost-Benefit Analyses
(2020)
We propose a new method to estimate benefits of road network improvements, which allows to include the induced demand without arbitrary assumptions. Instead of estimating induced demand (which is nontrivial and hardly possible in practice), we search for demand induction where initial benefits are mitigated to zero. Such approach allows to formulate a dual measure of benefit, covering both the potential benefits and the likelihood of consuming them by the induced traffic. We first estimate benefits of road network improvement assuming that traffic demand is fixed. Consequently, we find demand model configurations at which the benefits of the new investment become null, i.e., all the initial benefits are consumed by the traffic demand growth. We call such states of induced demand the Lewis–Mogridge points of the analysed improvement. We select the most probable of such points and use it to calculate the proposed novel indicator μ, for which the initial benefits (obtained under a fixed-demand assumption) are multiplied with a demand increase rate needed to consume them. We believe that such measure allows to include the critical phenomena of induced traffic and, at the same time, to overcome problems associated with reliable estimation of induced demand. As we illustrate with the case of two alternative road improvement schemes in Kraków, Poland, the proposed method allows to estimate maximal threshold of induced traffic and to select scenario more resilient to induced traffic.
This paper provides a critical reading of Janek Wasserman’s The Marginal Revolutionaries: How Austrian Economists Fought the War of Ideas. Wasserman depicts the evolution of the Austrian School from the 1860s until today, a particularly illuminating narrative for the readers of this journal. The breadth of portrayed economists, their cultural embeddedness in Austrian and US contexts, and the complexity of configurations across the school’s generations create a rich and readable story. The last third of the book suffers from allegations about the ideological agenda and institutional power of the Austrian economists which sometimes lack sufficient substantiation. The paper indicates how both in their theorizing and in their political activities, the Austrian economists can be seen as reformers instead of revolutionaries, and as constitutionalists instead of anti-democrats. Despite these disagreements, Wasserman’s portrayals evoke largely fair and challenging impulses both to scholars working in the Austrian research program and to those interested in the Austrian School’s long history, regardless of one’s ideological positions.
This paper embeds the early political economy of Friedrich August von Hayek in the intellectual milieu of German ordoliberalism. The urgency during the 1930s and 1940s to stabilize the disintegrating societal orders is identified as a crucial driver behind the parallelisms between Hayek and the ordoliberals. Their shared theoretical position is that in such moments, liberty can thrive sustainably only after a framework of general and stable rules has been established. Hayek’s proximity to ordoliberalism was most explicitly discernible in The Road to Serfdom and at the founding meeting of the Mont Pèlerin Society in 1947, culminating in the shared politico-economic vision of the competitive order. The contextual nature of Hayek’s ordoliberalism surfaced in the years after The Constitution of Liberty when his focus shifted, along with the postwar intellectual and institutional stabilization of the West: from how stable orders enable liberty, to how liberty enables the evolution of orders.